Sensors
Sensors

Show
GP2Y0A41SK0F IR Sensor Kit (4-30 cm) - 1 sensor
KIT-S-10-GP2Y0A41SK0F
Price: $21.70 In Stock
Item #: KIT-S-10-GP2Y0A41SK0F -

    The GP2Y0A41SK0F IR Sensor Kit will easily allow you to attach the Sharp IR Distance Sensor GP2Y0A41SK0F to Phidgets Interface Kits with Analog Inputs, like the 8/8/8 kit and 2/2/2 kit The Sharp IR Distance Sensor GP2Y0A41SK0F is a great low cost robotic range-finder. The Distance Sensor will report the presence of an object 4-30cm away from the sensor. The sensors reports this data as an analog value readable by most microcontrollers, like the Arduino. Includes: Sharp IR Distance Sensor...

    Sharp IR Distance Sensor GP2Y0A41SK0F (4-30CM)
    DK-GP2Y0A41SK0F
    Price: $10.95 In Stock
    Item #: DK-GP2Y0A41SK0F -

      The Sharp IR Distance Sensor GP2Y0A41SK0F is a great low cost robotic range-finder. The Distance Sensor will report the presence of an object 4-30cm away from the sensor. The sensors reports this data as an analog value readable by most microcontrollers, like the Arduino. This sensor can plug directly into a RobotGeek Sensor Shield using a Sharp IR to Servo Cable. This cable can also be handy to connect to other systems and controllers (users can cut/splice the wire). If you want to use this...

      PIR Wide Angle Sensor
      KIT-00081
      Price: $10.99 In Stock
      Item #: KIT-00081 -

        The PIR(Passive Infra-Red) Sensor is a pyroelectric device that detects motion by sensing changes in the infrared(radiant heat) levels emitted by surrounding objects.Each Wide Angle PIR Sensor cable includes a 4-pin cable, as well as a mount and hardware to adapt to all RobotGeek products with a centimeter grid pattern (Workbenches, Geekbot, etc.). Mount it at a right angle, and flat.Product FeaturesSingle bit output Small size On-board LEDs Power 3V to 6VDC operation 150uA idle, 3mA active(no...

        .28 Inch LED Digital DC Voltmeter - Red .28, Inch, LED, Digital, DC, Voltmeter, Red
        SS-114990164
        Price: $3.45 In Stock
        Item #: SS-114990164 -

          This is a super mini voltmeter with 0.28 inch LED display. It has reverse connect protection (though it is advisable to mind your wiring). When voltage is less than 10V, two decimal places will be shown. When voltage is more than 10V, one decimal place will be shown. This voltmeter would be great for a battery readout on your next robot, or generally useful for a retro readout panel!

          Crash sensor (Left) Crash, bump, nudge, roller switch, sensor, Left
          DF-SEN0138-L
          Price: $2.90 In Stock
          Item #: DF-SEN0138-L -

            The Crash sensor (Left) is a miniature snap-action switch, also trademarked and frequently known as a micro switch. It is an electric switch that is actuated by very little physical force. Micro switches are very widely used; among their applications are appliances, machinery, industrial controls, vehicles, and many other places for control of electrical circuits. They are usually rated to carry current in control circuits only, although some switches can be directly used to control small...

            Crash sensor (Right) Crash, bump, nudge, roller switch, sensor, Right
            DF-SEN0138-R
            Price: $2.90 In Stock
            Item #: DF-SEN0138-R -

              The Crash sensor (Right) is a miniature snap-action switch, also trademarked and frequently known as a micro switch. It is an electric switch that is actuated by very little physical force. Micro switches are very widely used; among their applications are appliances, machinery, industrial controls, vehicles, and many other places for control of electrical circuits. They are usually rated to carry current in control circuits only, although some switches can be directly used to control small...

              Fingerprint Sensor Fingerprint, finger, print, scanner, Sensor, reader, dfrobot, laser, input
              DF-SEN0188
              Price: $34.90 In Stock
              Item #: DF-SEN0188 -

                This is an Arduino compatible Fingerprint Sensor. With the high speed DSP processor, it could also work with other serial devices, such as MSP430, 51, AVR, PIC, STM32, ARM and FPGA. This fingerprint module can work alone without any principal computer or any PC software. It can store up to 1000 fingerprints. Supports fingerprint entry, intelligent image processing, fingerprint comparison and fingerprint search mode. It also has a high sensitivity to both wet and dry fingerprint recognition....

                Gravity: Analog Capacitive Soil Moisture Sensor- Corrosion Resistant Analog, Capacitive, Soil, Moisture, water, Sensor, Corrosion, Resistant, dfrobot
                DF-SEN0193
                Price: $7.90 In Stock
                Item #: DF-SEN0193 -

                  The Analog Capacitive Soil Moisture Sensor measures soil moisture levels by capacitive sensing, rather than resistive sensing like other types of moisture sensor. It is made of a corrosion resistant material, giving it a long service life. Insert it into soil and impress your friends with the real-time soil moisture data! The product includes an on-board voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V. It is compatible with low-voltage MCUs (both 3.3V and 5V logic)....

                  Gravity: Analog Flame Sensor Analog, Flame, fire, light, Sensor, input, environmental, dfrobot
                  DF-DFR0076
                  Price: $4.00 In Stock
                  Item #: DF-DFR0076 -

                    The Analog Flame Sensor can be used to detect fire or other light at wavelengths of 760nm ~ 1100nm. In a fire-fighting robot competition, this sensor can be used as the robot's eyes to find the fire's source. It can be used for fire-fighting robots, soccer robots, or a stationary system designed to detect fire. The flame sensor has a probe angle of 60 degrees. The flame sensor's operating temperature is -25 degrees Celsius to 85 degrees Celsius. It should be noted that the probe distance from...

                    Gravity: Analog Sound Sensor Analog, Sound, Sensor, microphone, input, dfrobot
                    DF-DFR0034
                    Price: $6.90 In Stock
                    Item #: DF-DFR0034 -

                      The Analog Sound Sensor is typically used in detecting the volume of ambient noise. You could make a really fancy clapper with this, or use it for any number of projects to display sound levels! Features: Allows voltage supply of 3.3V or 5V Standard assembling structure (two 3mm holes with multiple of 5cm as interval) Easy to recognizes sensor interface ("A" for analog and "D" for digital) Icons to simply illustrate sensor function High quality connector Immersion gold surface ...

                      Gravity: Analog UV Sensor V2 Analog, UV, Sensor, V2, dfrobot
                      DF-SEN0162
                      Price: $5.90 In Stock
                      Item #: DF-SEN0162 -

                        The Analog UV Sensor V2 with GUVA-S12SD chip is suitable for detecting the UV radiation in sunlight. It can be used in UV Index Monitoring, DIY project, UV-A Lamp Monitoring, Plants growing, Environmental monitoring, etc. It can detect the UV wavelength of 200-370nm with a quick response, linear analog voltage signal output. Small size, easy to install. With the diagram of the world health organization UV index grading standards, you can know the UV index from the sensor directly....

                        Gravity: DHT11 Temperature and Humidity Sensor DHT11, Temperature, Humidity, environment, Sensor
                        DF-DFR0067
                        Price: $5.20 In Stock
                        Item #: DF-DFR0067 -

                          This DHT11 Temperature and Humidity Sensor is powerful and easy to use! The DHT11 has a full range temperature compensation, low power consumption, long term stability and calibrated digital signal. A high-performance 8-bit microcontroller is integrated in the sensor with calibration-coefficient saved in OTP memory to provide accurate temperature readings. Reliable and inexpensive with plenty of documentation and projects online. Features: Standard assembling structure (two 3mm holes with...

                          Gravity: Digital Capacitive Touch Sensor Digital, Capacitive, Touch, Sensor, dfrobot, input
                          DF-DFR0030
                          Price: $5.90 In Stock
                          Item #: DF-DFR0030 -

                            Are you tired of your old clicky pushbuttons? Check out the Digital Capacitive Touch Sensor! This is the same sort of technology found in modern smartphones, and is a great addition to any ~duino project! This little sensor can "feel" touch and feedback a digital high/low voltage level. It can even detect a touch with a thin layer of paper or cloth between you and the sensor! Features: Allows voltage supply of 3.3V or 5V Standard assembling structure (two 3mm holes with multiple of 5cm as...

                            Gravity: Digital Piezo Disk Vibration Sensor Digital, Piezo, Disk, Vibration, Sensor, dfrobot
                            DF-DFR0052
                            Price: $4.50 In Stock
                            Item #: DF-DFR0052 -

                              The Digital Piezo Disk Vibration Sensor gives your project clear analog input from vibration! The board buffers a piezoelectric transducer that responds to changes in vibration by generating a measurable output voltage change which is proportional to the strength of the movement.

                              Gravity: Digital Self-Locking Switch Digital, Self-Locking, Switch, button, locking, dfrobot
                              DF-DFR0423
                              Price: $1.90 In Stock
                              Item #: DF-DFR0423 -

                                This module is a Digital Self-Locking Switch. Press the button to turn it to the "on" state and press it again to turn it to the "off" state. The board has immersion gold plating and is compatible with the 3-pin interface making it easy to connect to a RobotGeek Sensor Shield

                                Gravity: Terminal Sensor Adapter V2.0 Terminal, Sensor, Adapter, screw terminal, output, voltage, dfrobot
                                DF-DFR0055
                                Price: $2.45 In Stock
                                Item #: DF-DFR0055 -

                                  This is the Terminal Sensor Adapter V2.0, it can be accessed by digital input and analog input modules. It provides an easy way to connect a switch or any modules that require a pull-up/down resistor to the microcontroller, as it has a 10K resistor between A & B, A & C, respectively.

                                  Grove - Hall Sensor Grove, Hall, Sensor, hall effect, voltage, motor, magnetic field
                                  SS-SEN14034P
                                  Price: $5.90 In Stock
                                  Item #: SS-SEN14034P -

                                    The Grove - Hall Sensor measures the Hall Effect, which is a production of a voltage difference across an electrical conductor, transverse to an electric current in the conductor, as well as a magnetic field perpendicular to the current. The output of the continuous-time switch Hall sensor on this Twig switches low and turns on when a magnetic field (south polarity) perpendicular to the Hall sensor exceeds the BOP threshold, and it switches high (turns on) when the magnetic field disappears. ...

                                    Grove - High Temperature Sensor Grove, High, Temperature, Sensor
                                    SS-811010001
                                    Price: $8.90 Back Order
                                    Item #: SS-811010001 -

                                      Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The Grove - High Temperature Sensor uses a K type thermocouple for temperature detection, with a Thermistor to detect the ambient temperature, used as a cold-compensation reference. The detectable range of this Sensor is -50℃ to 600℃ (-58ºF to 1112ºF), and the accuracy is rated at ±(2.0% + 2℃). Package Includes: Grove - High Temperature Sensor x1 Thermocouple Temperature Sensor x1 24AWG Grove Cable...

                                      LED Voltage Meter (Red) Voltmeter, LED, Voltage, Meter, Red, voltimeter, dfrobot
                                      DF-DFR0130-R
                                      Price: $6.80 In Stock
                                      Item #: DF-DFR0130-R -

                                        This is a standalone DC Voltmeter. It measures 3V-30V with ±1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuitry or components, it gives the reading straight away. Easy to use, and is a good companion to robotic applications.

                                        Positioning IR Camera Positioning, IR, infrared, Camera, sensor, wii, input, human, movement, tracking
                                        DF-SEN0158
                                        Price: $23.55 In Stock
                                        Item #: DF-SEN0158 -

                                          Ever want your robot to hunt down heat objects or navigated with fire? With the Positioning IR Camera, you can track up to four heat/IR sources simultaneously! The applications are plenty and can go from tracking of robots with IR transmitters for navigation to light barriers, determining the direction an object is going, working as a flame sensor, or tracking heat sources. It's fully compatible with Arduino with only four wires over I2C. This infrared positioning camera can be controlled with...

                                          Phidgets Encoder HighSpeed 4-input Phidget Encoder High Speed, Phidget High Speed Encoder
                                          PH-1047
                                          Price: $100.00 Back Order
                                          Item #: PH-1047 -

                                            Product Features Reads up to 4 encoders simultaneously Time Resolution of 1 μs Includes 4 Digital Inputs for detecting the state of switches and sensors Connects directly to a USB port on your PC Product Description The PhidgetEncoder Highspeed 4-Input can be used with a wide assortment of mechanical and optical encoders. The encoder should be of quadrature output type, indicating that there will be two quadrature output channels (usually labeled A and B) and a third output channel (only on...

                                            Phidgets High Speed Encoder Phidget Encoder High Speed, Phidget High Speed Encoder
                                            PH-1057
                                            Price: $60.00 In Stock
                                            Item #: PH-1057 -

                                              Product Features Connects to any typical two-bit optical encoder. Returns up to 500,000 counts per second. Can be used as an accurate human input device. Connects directly to a computer’s USB port. Product Description The PhidgetEncoder HighSpeed connects to any typical two-bit optical encoder and can return up to 500,000 counts per second. Specifically it reads a standard incremental non-differential TTL encoder. The 1057 can be used to measure shaft speed or as a very accurate human input...

                                              8 Inch FlexiForce 0-1 lbs. Resistive Force Sensor flexiforce, flexi force, FSR, force sensing resistor, load sensor, force sensor, piezoresistive force sensor, resistive force sensor, thin film resistive force sensor
                                              TI-FS1LB
                                              Price: $24.95 In Stock
                                              Item #: TI-FS1LB -

                                                1-Pound FlexiForce Force Sensor Measures from 0 to 1 lbs. FlexiForce Sensor Model A201.   FlexiForce is... A versatile, durable piezoresistive force sensor that can be made in a variety of shapes and sizes A piezoresistive sensing device in which resistance is inversely proportional to applied force A customizable, economical force measurement tool that is easily integrated into OEM products A patented, ultra-thin (0.008"), flexible printed circuit that senses contact force A force...

                                                Light Sensor 1000 lux Phidgets Precision Light Sensor, Phidget Precision Light Sensor
                                                PH-1142
                                                Price: $7.00 In Stock
                                                Item #: PH-1142 -

                                                  Product Specifications Sensor Output Type: Non-Ratiometric Response Time Max:2ms Peak Sensitivity Wavelength:625 nm Light Level Min:1 lux Light Level Max(5v): 1000 lux Light Current Ratio:1.2 Device Current Consumption: 5 mA Output Impedance: 1K ohms Bandwidth / Reaction Time: 50 Hz Minimum / Maximum Voltage: 2.4VDC to 5.5VDC Operating Temp Min:-40° Operating Temp Max:85° Product Manual This sensor connects to an Analog Input on the PhidgetInterfaceKit 8/8/8 or the PhidgetTextLCD. This...

                                                  Resistive Flex Sensor 2.2 Inch Flex sensor, 2.2 inch flex sensor, small flex sensor, nintendo power glove, flexible sensor, resisitve sensor, spectra,
                                                  S-20-SEN10264
                                                  Price: $7.95 In Stock
                                                  Item #: S-20-SEN10264 -

                                                    The little brother to the 4.5" Flex Sensor, the 2.2" Flex Sensor is just as fun! This sensor's diminutive size makes it great for all sorts of small spaces. The flex sensor changes its resistance as its flexed, so you can easily create an analog signal to connect to your microcontroller. We recommend using our Voltage Divider to easily create that signal. The connector is .1"/2.5mm spaced, so it will work with standard breadboards. We recommend that you reinforce the base of the sensor when...

                                                    Resistive Flex Sensor 4.5 Inch
                                                    SF-SEN-08606
                                                    Price: $12.95 In Stock
                                                    Item #: SF-SEN-08606 -

                                                      Description: A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It's so bad! The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). Straight (unflexed) resistance: ~9000 Ohm 90 degree bend resistance: ~14000 Ohm 180 degree bend...

                                                      Switch - Floor Mat - Single Strip
                                                      AC-700-30-926C
                                                      Price: $4.45 In Stock
                                                      Item #: AC-700-30-926C -

                                                        The Floor Mat Switch works by spacing two strips of metal apart with thin squares of foam in-between them every .75 inches. The pairs of metal strips are spaced out 2.5 inches from each other for the length of the mat. When someone steps on the mat their weight presses the two metal strips together creating a closed contact. All the strips are connected down both sides of the mat creating one large switch. The individual strips can be cut apart to create individual switches and the mat itself...

                                                        8 Inch FlexiForce 0-25 lbs. Resistive Force Sensor flexiforce, flexi force, FSR, force sensing resistor, load sensor, force sensor, piezoresistive force sensor, resistive force sensor, thin film resistive force sensor
                                                        TI-FS25LB
                                                        Price: $24.95 In Stock
                                                        Item #: TI-FS25LB -

                                                          25-Pound FlexiForce Force Sensor Measures from 0 to 25 lbs. FlexiForce Sensor Model A201.   FlexiForce is... A versatile, durable piezoresistive force sensor that can be made in a variety of shapes and sizes A piezoresistive sensing device in which resistance is inversely proportional to applied force A customizable, economical force measurement tool that is easily integrated into OEM products A patented, ultra-thin (0.008"), flexible printed circuit that senses contact force A force...

                                                          Grove - Button Grove - Button
                                                          SS-COM22242P
                                                          Price: $2.95 In Stock
                                                          Item #: SS-COM22242P -

                                                            As simple as input gets, the very first computers had buttons and so will your ingenious project. The button is configured with pull-down resistor ready for use with our microcontrollers as digital input.

                                                            Grove Slider Potentiometer
                                                            SS-COM05231P
                                                            Price: $6.50 In Stock
                                                            Item #: SS-COM05231P -

                                                              Rotary potentiometers are a great way to control all sorts of devices through your Arduino - but sometimes they're a bit boring. Bring some pizazz back to your controller with the Grove - Slide Potentiometer! This Grove compatible sensor will plug directly into your Grove Sensor Shield and you'll be ready to go! You can read the data from the slider, just as you would any other potentiometer. It even has an onboard LED that you can control from your Arduino! Technical Specifications 30mm slide...

                                                              Grove - Thumb Joystick
                                                              SS-COM90133P
                                                              Price: $6.99 In Stock
                                                              Item #: SS-COM90133P -

                                                                How many PlayStation 2 Controllers have to die for your next project? Now with the Grove - Thumb Joystick the answer is NONE! Like most joysticks, this one uses 2 potentiometers to measure the current angles of the joystick. However this joystick has a pushbutton hidden within! Just push directly down on the top of the joystick, and you'll feel the satisfying 'click' of a pushbutton. Use your extra input to fire the lasers, initiate uprising, or start any other robot related task. NOTE: The...

                                                                Phidget Precision Temperature Sensor Phidgets Precision Temperature Sensor, Phidget Precision Temperature Sensor, Phidget Temperature Sensor, Phidgets Temperature Sensor
                                                                PH-1124
                                                                Price: $15.00 In Stock
                                                                Item #: PH-1124 -

                                                                  Temperature sensor with a range of -30°C to +80°C with a typical error of ±0.75°C in the 0°C to 80°C range. Note: The temperature sensor component is rated at -50°C to +150°C, but the other components on the board, the connector and the cable are rated at -30°C to +80°C. A 24" sensor cable is included. Product Manual This sensor connects to an Analog Input on the PhidgetInterfaceKit 8/8/8 or the PhidgetTextLCD. ...

                                                                  Phidgets IR Reflective Sensor 5mm Phidgets IR Reflective Sensor 5mm, Phidget IR Reflective Sensor 5mm, Phidgets IR Sensor
                                                                  PH-1102
                                                                  Price: $6.85 In Stock
                                                                  Item #: PH-1102 -

                                                                    Based on the QRB1114 this sensor can detect an object at 5mm. It can be used to determine the difference between black (low reflective conditions) and white (high reflective conditions).  Includes 24" Phidget sensor cable. Board Dimensions: 3.0 x 3.8 cm Mounting Holes: 2.3 x 3 Download the Phidget Analog Sensor Guide

                                                                    Phidgets Precision Voltage Sensor Phidgets Precision Voltage Sensor, Phidget Precision Voltage Sensor
                                                                    PH-1135
                                                                    Price: $19.00 In Stock
                                                                    Item #: PH-1135 -

                                                                      The Voltage Sensor measures the differential voltage between the input terminals and outputs the difference proportionally. The maximum differential voltage that can be measured accurately is ±30V. Resources Product Manual   Product Specifications Characteristic Value Current Consumption 3.6mA Input Impedance 1MegaOhm Recommended Max Difference between Vin+ and Vin- 30V Absolute Maximum difference between Vin+ and Vin- 35V Input CMR 40V Output Range 0 to 5V Min/Max error ±2% Typical Error...

                                                                      Sharp IR Distance Sensor - GP2D12 Alternative (10-80 cm) Sharp, IR, Distance, Sensor, GP2D12, (4-30 inches)
                                                                      PX-28995
                                                                      Price: $12.95 In Stock
                                                                      Item #: PX-28995 -

                                                                        One of the most favored IR range sensors on the market. Detects distances from 4" to 30" (10cm-80cm). Note: The sensor sold here is actually a Sharp IR GP2Y0A21YK0F. It has the same distance range as a GP2D12 and very similar analog output properties. The GP2D12 is extremely difficult to source currently, so these sensors provide a great alternative. For more information on the minor differences, please refer to the datasheets for each sensor: Datasheets GP2D12 Datasheet GP2Y0A21YK0F...

                                                                        Softpot Rotary Potentiometer
                                                                        S-20-SEN-08678
                                                                        Price: $14.95 In Stock
                                                                        Item #: S-20-SEN-08678 -

                                                                          These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. Unit comes with adhesive...

                                                                          Switch - Floor Mat - 14 Inches x 30 Inches
                                                                          KIT-AC-700-30-926B
                                                                          Price: $19.95 In Stock
                                                                          Item #: KIT-AC-700-30-926B -

                                                                            The Floor Mat Switch works by spacing two strips of metal apart with thin squares of foam in-between them every .75 inches. The pairs of metal strips are spaced out 2.5 inches from each other for the length of the mat. When someone steps on the mat their weight presses the two metal strips together creating a closed contact. All the strips are connected down both sides of the mat creating one large switch. The individual strips can be cut apart to create individual switches and the mat itself...

                                                                            Triple Axis Accelerometer Breakout - ADXL345 Triple-Axis Accelerometer Breakout, ADXL345 Accelerometer, 3-axis accelerometer, Triple-Axis Accelerometer Breakout
                                                                            SF-SEN-09836
                                                                            Price: $27.95 In Stock
                                                                            Item #: SF-SEN-09836 -

                                                                              This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited to measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion...

                                                                              Triple-Axis Accelerometer Breakout - ADXL335 Triple-Axis Accelerometer Breakout, ADXL335 Accelerometer, 3-axis accelerometer, Triple-Axis Accelerometer Breakout
                                                                              SF-SEN-09269
                                                                              Price: $24.95 In Stock
                                                                              Item #: SF-SEN-09269 -

                                                                                Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of accelerometers. The ADXL335 is a triple axis accelerometer with extremely low noise and power consumption - only 320uA! The sensor has a full sensing range of +/-3g. There is no on-board regulation, provided power should be between 1.8 and 3.6VDC. Board comes fully assembled and tested with external components installed. The included 0.1uF capacitors set...

                                                                                Triple-Axis Digital-Output Gyro ITG-3200 Breakout Triple-Axis Digital-Output Gyro ITG-3200, 3-axis robot gyro, 3-axis gyroscope, 3-axis gyro breakout, digital gyro
                                                                                SF-SEN-09801
                                                                                Price: $49.95 In Stock
                                                                                Item #: SF-SEN-09801 -

                                                                                  Description: This is a breakout board for InvenSense's ITG-3200, a groundbreaking triple-axis, digital output gyroscope. The ITG-3200 features three 16-bit analog-to-digital converters (ADCs) for digitizing the gyro outputs, a user-selectable internal low-pass filter bandwidth, and a Fast-Mode I2C (400kHz) interface. Additional features include an embedded temperature sensor and a 2% accurate internal oscillator. The ITG-3200 can be powered at anywhere between 2.1 and 3.6V. For power supply...

                                                                                  GP2D12 Alternative IR Distance Sensor Kit (10-80 cm) - 1 sensor GP2D12 Alternative IR Distance Sensor Kit (4-30 Inch) - 1 sensor
                                                                                  KIT-S-10-P1101KT
                                                                                  Price: $23.70 In Stock
                                                                                  Item #: KIT-S-10-P1101KT -

                                                                                    One of the most favored IR range sensors on the market. Detects distances from 4" to 30" (10cm-80cm). Note: The sensor sold here is actually a Sharp IR GP2Y0A21YK0F. It has the same distance range as a GP2D12 and very similar analog output properties. The GP2D12 is extremely difficult to source currently, so these sensors provide a great alternative. For more information on the minor differences, please refer to the datasheets for each sensor: Datasheets GP2D12 Datasheet GP2Y0A21YK0F...

                                                                                    8 Inch FlexiForce 0-100 lbs. Resistive Force Sensor flexiforce, flexi force, FSR, force sensing resistor, load sensor, force sensor, piezoresistive force sensor, resistive force sensor, thin film resistive force sensor
                                                                                    TI-FS100LB
                                                                                    Price: $24.95 In Stock
                                                                                    Item #: TI-FS100LB -

                                                                                      100-Pound FlexiForce Force Sensor Measures from 0 to 100 lbs. FlexiForce Sensor Model A201.   FlexiForce is... A versatile, durable piezoresistive force sensor that can be made in a variety of shapes and sizes A piezoresistive sensing device in which resistance is inversely proportional to applied force A customizable, economical force measurement tool that is easily integrated into OEM products A patented, ultra-thin (0.008"), flexible printed circuit that senses contact force A...

                                                                                      Grove - 3-Axis Accelerometer Grove 3-Axis Accelerometer, 3-axis accelerometer, arduino accelerometer, Grove accelerometer, accelerometer sensor
                                                                                      SS-SEN21853P
                                                                                      Price: $16.95 In Stock
                                                                                      Item #: SS-SEN21853P -

                                                                                        Description This 3-axis Accelerometer module is based on MMA7660FC with Digital Output I2C. This Grove can be used for sensing data changes, product orientation, and gesture detection through an interrupt pin (INT).It is a very low power, low profile capacitive MEMS sensor Grove. What is new Mounting edge for you to solder I2C Groves together, and free you from wiring. Flat bottom. 5VDC input Features Grove compatible interface 3 axis motion/orientation sensing Digital Output (I2C) 10,000 g...

                                                                                        Grove - 3-Axis Compass Grove 3-Axis Compass, arduino compass, compass sensor, 3-axis compass, arduino compass sensor
                                                                                        SS-SEN12753P
                                                                                        Price: $15.90 In Stock
                                                                                        Item #: SS-SEN12753P -

                                                                                          Description 3-Axis Compass module, a member of Grove family uses I²C based Honeywell HMC5883L digital compass. This ASIC is equipped with high resolution HMC118X magneto-resistive sensors and a 12-bit ADC. It provides compass heading accuracy up to 1° to 2°. Signal conditioning like amplification, automatic degaussing strap drivers and offset cancellation are inbuilt. This Grove module also includes a MIC5205-3.3 for power supply requirement. Hence user can connect any 3.3V to 6V DC power...

                                                                                          Grove - 3-Axis Gyro Grove 3-Axis Gyro 3-axis gyro, arduino gyro, Grove gyro, gyro sensor, gyroscope sensor, arduino gyroscope, Grove gyroscope
                                                                                          SS-SEN11763P
                                                                                          Price: $39.95 In Stock
                                                                                          Item #: SS-SEN11763P -

                                                                                            Description Grove - 3-axis Gyro module based on ITG 3200. It is the world’s first single-chip, digital-output, 3-axis MEMS motion processing gyro optimized for gaming, 3D mice, and motion-based remote control applications for Internet connected Digital TVs and Set Top Boxes. The ITG-3200 features three 16-bit analog-to-digital converters (ADCs) for digitizing the gyro outputs, a user-selectable internal low-pass filter bandwidth, and a Fast-Mode I2C (400kHz) interface. Grove - 3-axis Gyro is...

                                                                                            Grove - Electricity Sensor Grove Electricity Sensor, arduino electricity sensor, electrical sensor, electricity detection sensor
                                                                                            SS-SEN23931P
                                                                                            Price: $7.95 In Stock
                                                                                            Item #: SS-SEN23931P -

                                                                                              Description The Electricity sensor module is a member of Grove. It is based on the TA12-200 current transformer which can change large alternating current into a small amplitude. You can use it to test large alternating current upto 5A. Features Grove compatible interface Maximum 5A input High accuracy Small size Applications Alternating current measurment Device condition monitoring Document Datasheet ...

                                                                                              Grove - Light Sensor Grove Light Sensor, arduino light sensor, freeduino light sensor, seeeduino light sensor
                                                                                              SS-SEN11302P
                                                                                              Price: $4.95 Back Order
                                                                                              Item #: SS-SEN11302P -

                                                                                                Description The Light sensor module uses the GL5528 photoresistor to detect the light intensity of the environment. The resistance of the sensor decreases when the light intensity of the environment increases. The chip LM358 is used as a voltage follower to enable you get a accurate data. Features Grove compatible interface Wide supply voltage range: 3V-30V 2.0cm x 2.0cm Grove module? Minimum external parts Applications Ideas Electronic toys Light-control switch Monitor Documents Please visit...

                                                                                                Grove - Magnetic Switch Sensor Grove Magnetic Switch, Grove Magnet, Magnetism Switch, Magnet switch, arduino magnet switch, magnetism sensor, arduino magnetic sensor
                                                                                                SS-COM11335P
                                                                                                Price: $4.95 In Stock
                                                                                                Item #: SS-COM11335P -

                                                                                                  Description This is a Grove interface compatible Magnetic switch module. It is based on encapsulated dry reed switch CT10. CT10 is single-pole, single throw (SPST) type, having normally open ruthenium contacts. The sensor is a double-ended type and may be actuated with an electromagnet, a permanent magnet or a combination of both. The magnetic switch is a wonder tool for designers who would like to turn a circuit on and off based on proximity. Features Grove compatible interface 2.0cm x 2.0cm...