Item #: RG-SNAPPER-MINI -
× *Please Note: RobotGeek Snapper Mini is intended to be 3D printed. Make sure you have access to a 3D printer or 3D printing service before purchasing this kit.* Download the 3D files from our Thingiverse The RobotGeek Snapper Mini - 9G Servo 3D printable Robot arm is a fully 3D printable robot arm kit! The kit comes with all of the servos hardware and base to assemble the arm, all you need to do is print the rest and assemble! The Snapper Mini works off the same code as the full Snapper kit...
Item #: RG-9GTURRET -
× *Please Note: RobotGeek RoboTurret Mini is intended to be 3D printed. Make sure you have access to a 3D printer or 3D printing service before purchasing this kit.* Download the 3D files from our Thingiverse The RoboTurret Mini is 9g pan and tilt / Turret Designed to work with the RobotGeek standard Centimeter Grid pattern, this is a cheap and easy way to add a solid little turret to your next project. Kit Contains: 2 x 9G Metal Gear Mini Servo RobotGeek Joystick 2 x RobotGeek 150mm Sensor...
Item #: RG-CHIP-E -
× *Please Note: Chip-E is intended to be 3D printed. Make sure you have access to a 3D printer or 3D printing service before purchasing this kit. If you do not have access to a 3D printer please refer to our guide on the bottom of the page on how to acquire the 3D printed parts.* Chip-E is RobotGeek’s first 3D printable robot kit that you can build yourself! Powered by the RGS-13 servos and the RobotGeek Geekduino and Sensor Shield components Chip-E is a cute and lovable walking companion that...
Item #: RG-SNAPPER -
The Snapper Robot Arm is a perfect entry level kit for getting started with Arduino and robotics. This Arduino Robot Arm is aimed at those looking for robot kits for hobby and education. The Snapper is based on the open source Arduino controller and the extremely modular RobotGeek family of parts, sensors, and components. The robot arm can be easily modified and upgraded for many different types of projects. Joystick Control 5 DOF Arduino Control Strong Parallel Gripper Powerful 13 kg-cm...
Item #: RG-SNAPPER-CORE -
The RobotGeek Snapper Core Kit is the base arm hardware and servos necessary to build a snapper arm, for those who already have a microprocessor board such as a Geekduino/Arduino. If you would like a full kit that contains a microprocessor board and input modules, check out the RobotGeek Snapper Arm Kit. This core kit contains all the arm hardware, including a 120mm Slewing Bearing, RobotGeek 180 degree servos, and all the necessary brackets, mounts, body parts, nuts, bolts, and wires you need...
Item #: RG-GEEKBOT -
The GeekBot Arduino Compatible Rover is a highly flexible wheeled rover created from the ground up to be completely modular and easy to customize. Powered by two high speed continuous turn robot servos, GeekBot has a strong payload capability of 1kg/2.2lbs and moves fast at up to 0.4Mps / 1.3fps. Each Geekbot comes with a 2200mah 7.4V rechargeable Lithium Ion battery, allowing your Geekbot to run for hours! Integrated protection circuitry protects the battery from under/over voltage. Each kit...
Item #: RG-ANTSY -
*3D Printed shells not included There is a new robot crawling into town and they call it Antsy! Take one look and you can see inspiration for the design comes from a well-known insect, the ant. This hexapod design incorporates the use of three servos and a linkage system to produce locomotion at a fraction of the cost of other hexapod kits. RobotGeek Antsy Hexapod w/ Armor by RobotGeek on Sketchfab If you do not have access to a 3D printer, you may download the 3D files from our Thingiverse or...
Item #: RG-WHEGLY -
The RobotGeek Whegly is an Arduino based, 4x wheg (wheel / leg) robot kit designed to overcome rougher terrain than your average wheeled robot. The open wheel design allows the Whelgy Robot to quickly change from a standard roll to climbing small obstacles wherever necessary. Whegly is powered by the RobotGeek Geekduino, 4x RobotGeek Continuous Rotation Servos and is constructed of a rigid 1/8" thick Delrin body capable of withstanding those obstacles he is so eager to walk right over. Whegly...
Item #: ASM-RG-PANTILT -
The Robot Geek Pan & Tilt Kit is a basic Pan & Tilt with two Robot Geek Robot Servos and brackets needed for a small Pan & Tilt setup. (If you want a complete kit with a Geekduino, control sensors, laser and more check out the Robot Geek Desktop Roboturret.) The Pan & Tilt comes with mounting plates for a standalone configuration and stand offs for mounting directly onto projects. The mounting plates conform to the standard Robot Geek 1 X 1 CM hole pattern used on all Robot...
Item #: ASM-RG-TURRET -
The RobotGeek Desktop RoboTurret is the latest in our line of RoboTurrets. The Desktop RoboTurret is an Arduino based robotic platform that makes it easy to get started in the world of robotics! Whether you're completely new to Arduino or you've got a few Arduino project under your belt, the Desktop RoboTurret is an amazing platform to build robotic projects on. The Desktop RoboTurret's documentation will introduce you to robot servos, sensors, and basic robot behavior. Want to build a vision...
Item #: RG-GRIPPER2 -
The RobotGeek Parallel Gripper is a simple and easy-to-build solution for roboticists looking to pick up small objects. The RobotGeek Parallel Gripper is a parallel actuating manipulator; keeping size, weight, and cost to a minimum and making it perfect for simple applications. Ideal for picking up small, lightweight objects such as sugar cubes, marbles, Legos, eyeballs, and the occasional stray cheese puff. The included foam padding can be added or removed for different gripper...
Item #: RG-DARTGUN -
If you want to add a little fun and firepower to your robot turret (or any other project) you'll love this foam dart gun kit. The included single shot dart gun packs quite a punch, with a range of about 30 feet! Assembly is quick and easy; especially when you follow the instructions, which can be found here. While designed to be used with one of our pan tilt robot turrets, you can use the foam dart kit with any Arduino compatible micro-controller. As a standalone project, we recommend our...