USB 3.0 A to Micro B Cable - 1.5ft USB 3.0 A to Micro B Cable - 1.5ft, usb 3.0, usb 3.0 a, usb 3.0 a to micro b, usb micro b, usb charge cable
Price: $2.95

    USB 3.0 A to Micro B cable.

    RobotGeek Sensor Cable Pack robotgeek, robotgeek sensor pack, robotgeek sensor cable pack, robotgeek cable pack, servo wire, 2 pin jumpers, sensor squid, pin couplers, jr female, y cable, variety pack
    Price: $24.95

      The Robot Geek Sensor Cable Pack will hook you up with all your sensor and servo wiring needs and beyond. This variety cable pack includes: 3x 3 Pin Female to Female Y Cable 1x 32 Foot Standard Servo Wire 20x 3 Pin Sensor Cable 10x 2 Pin Dual-Female Jumper Wires (300mm) 10x Sensor Squids 25x 2-Pin Couplers 25x 3-Pin Couplers ...

      RobotGeek 150mm 3-pin Sensor Cable 10 pack
      Price: $4.95

        RobotGeek Sensor Cables are for use with all RobotGeek sensors, shields, servos, and output devices. These cables are .1"(2.54mm) pitch and are 150mm in length with color coded wires. Add some 3-Pin Couplers to connect cables together for extension cables. These cables are also compatible with Phidgets Sensors and Electronic Brick Sensors, though they do not have the plastic buckle like traditional Phidgets/Electronic Brick Cables. ...

        300mm 3-pin Female Sensor Cable 10 pack
        Price: $4.95

          RobotGeek Sensor Cables are for use with all RobotGeek sensors, shields, servos, and output devices. These cables are .1"(2.54mm) pitch and are 300mm in length with color coded wires. Add some 3-Pin Couplers to connect cables together for extension cables. These cables are also compatible with Phidgets Sensors and Electronic Brick Sensors, though they do not have the plastic buckle like traditional Phidgets/Electronic Brick Cables. ...

          Servo Cable
          Price: $12.95

            Our 32 Feet Standard Servo Wire is great for repairing and extending servo and sensor cables. The Futaba Black-Red-White (Ground-Voltage-Signal) color scheme will help you keep your signals straight. This cable has 24awg stranded wire and no connectors on either end.

            Sensor Y Cable - 100mm sensor Y cable, sensor splitter cable, servo y cable, servo splitter cable
            Price: $1.95

              The Sensor Y Cable is a great tool for splitting a single signal to multiple output boards. These cables are 100mm long and use a standard .1"/2.54mm pitch, making them compatible with RobotGeek I/O boards, Hobby servos, and breadboards. With this cable you can easily connect from a single output port on the RobotGeek Sensor Shield to a RobotGeek Relay, a RobotGeek LED Driver or a RobotGeek Buzzer. Combine this cable with 2 3-Pin Couplers to easily connect from 1 port to 2 Hobby Servos. You...

              Squid Cable
              Price: $4.95

                Sometimes you need to hook a servo or a sensor directly to your Arduino, or minimize the mess of jumper wires on your breadboard. These Squid Sensor Cables - 10 pack will help you do just that! On one end, you have a standard 3-pin connector (.1"/2.54mm pitch), and on the other end you have 3 single female jumper wires. You can easily position each cable exactly where you need it. and are 200mm in length. Add some 3-Pin Couplers to attach these cables directly to a servo or your arduino. These...

                3-Pin Couplers
                Price: $2.95

                  You can use these 3 pin couplers to connect 3 pin jumper wires together and create your own extension wires. This is perfect for extending analog sensors or servos! You can also use them to make modular connectors on your breadboard/protoboard so that connecting to other components is even easier. The pins on these couplers are spaced at .1"/2.54mm, so they're compatible with Electronic Brick/Phidgets sensor cables, hobby servo cables, and most breadboards/protoboard. They are NOT compatible...

                  4 Pin Sensor Cable 300mm 4 pin sensor cable, 4pin sensor cable, lcd sensor cable, lcd cable, 4pin cable, 4 pin cable, sensor cable
                  Price: $1.95

                    This standard 4 Pin Sensor Cable is 30cm long and has a .1"/2.54mm pitch, making it compatible with 4-pin sensors and shields. You can also add Pin Couplers and attach the cable to breadboards.

                    RobotGeek 4 Pin Sensor Squid 300m 4 pin, sensor, cable, squid, data, 300m, jumper, breakout
                    Price: $4.95

                      Sometimes you need to hook a serial/I2C device directly to your Arduino, or minimize the mess of jumper wires on your breadboard. These 4 Pin Sensor Squid 300m cables will help you do just that! On one end, you have a standard 4-pin connector (.1"/2.54mm pitch), and on the other end you have 4 single female jumper wires. You can easily position each cable exactly where you need it. Each cable is 300m in length. Comes in pack of 10 squid cables. Pair these cables with 2-pin couplers to adapt...

                      2-Pin Couplers
                      Price: $2.95

                        You can use these 2 pin couplers to connect 2/4 pin jumper wires together and create your own extension wires. You can also use them to make modular connectors on your breadboard/protoboard so that connecting to other components is even easier. The pins on these couplers are spaced at .1"/2.54mm, so they're compatible with Electronic Brick/Phidgets sensor cables and most breadboards/protoboard. They are NOT compatible with Grove cables. ...

                        2 Pin Dual-Female Jumper Wire - 300mm - 10pcs pack 2 Pin, Dual, Female, Jumper, Wire, 300mm, cable
                        Price: $4.50

                          These 2 Pin Dual-Female Jumper Wire - 300mm - 10pcs pack are perfect for prototyping. Use them to run power from one breadboard rail to another, or use multiples to connect signals from one board to another. Each pack comes with 10 cables and each cable is 300mm long. The .1" pitch is great for standard breadboards.

                          Premium USB to Micro USB Charge & Sync Cable - 6ft
                          Price: $6.95

                            This 6ft Micro USB Cable is perfect for powering and programming controllers like the RobotGeek Geekduino

                            USB A Male to Mini B (5P) M - 6ft
                            Price: $4.95

                              Description This USB A plug to Mini 5 pin (one ID Pin) plug is designed for USB peripherals such as cellular phones, digital devices or PDA. Introduction: With much smaller than existing USB connectors, our 5 pin (one ID Pin) provides reliable host-to-peripherals connectivity for portable/hand-help PC architecture, cellular phones and other digital devices, such as, DSC and PDA. This product is fully compliant with USB 1.1 Standard Specification.

                              USB A Male to A Male USB, A, Male, to, USB A Male
                              Price: $5.95

                                The USB A Male to A Male cable is a strange one. With a USB A Male plug on each end, this cable allows you to hook up USB devices in non-standard ways. If you need it, you know.