Shop

Show
8 Inch Stroke 110 LB Linear Actuator with Feedback large Linear Actuator, large arduino linear actuator, linear actuator for arduino
M-200-50-5-1577-8
Price: $109.95 In Stock
Item #: M-200-50-5-1577-8 -

    This is a 12V DC 110lb Linear Actuator from Creative Werks. (part number LACT2P) These are reliable, well built tough linear actuators. The sturdy mounting brackets make them easy to mount and won't break. If you are looking for a basic manual controller we recommend the Linear Actuator Controller kit. If you are looking to control these from an Arduino we recommend checking out the Arduino Linear Actuator tutorials below! Arduino Linear Actuator Tutorials: Preset Position Button Control of a...

    RFID EM4200 Disposable Wristband (Red)
    RFID-DSWRB-RED
    Price: $0.95 In Stock
    Item #: RFID-DSWRB-RED -

      RFID EM4200 Disposable Wristband (Red) Frequency 125 kHz Protocol EM4102 Read / Write Read only EEPROM Capacity 64 Bits Dimensions 25cm length (one size fits most) Read Range 50.8mm ...

      RobotGeek Temperature Sensor RobotGeek, Temperature, temp, Sensor, thermometer, environment
      ASM-RG-TEMP
      Price: $6.95 In Stock
      Item #: ASM-RG-TEMP -

        Want to make your project kick into gear when life turns up the heat? The RobotGeek Temperature Sensor can feel its way through! With the 3-pin Sensor Cable standard, you can easily connect this to your project and start reading the temperature! Use it to activate your air conditioner, control the temperature in a cold frame, log the temperature of a greenhouse, or to monitor the temperature of a pie on the windowsill! The options are limitless and the temperature is accounted for. As with all...

        USB A Male to A Male USB, A, Male, to, USB A Male
        CBL-USBA2A
        Price: $5.95 In Stock
        Item #: CBL-USBA2A -

          The USB A Male to A Male cable is a strange one. With a USB A Male plug on each end, this cable allows you to hook up USB devices in non-standard ways. If you need it, you know.

          10 Inch Stroke 110 LB Linear Actuator with Feedback large Linear Actuator, large arduino linear actuator, linear actuator for arduino
          M-200-50-5-1577-10
          Price: $113.95 In Stock
          Item #: M-200-50-5-1577-10 -

            This is a 12V DC 110lb Linear Actuator from Creative Werks. (part number LACT2P) These are reliable, well built tough linear actuators. The sturdy mounting brackets make them easy to mount and won't break. If you are looking for a basic manual controller we recommend the Linear Actuator Controller kit. If you are looking to control these from an Arduino we recommend checking out the Arduino Linear Actuator tutorials below! Arduino Linear Actuator Tutorials: Preset Position Button Control of a...

            DC Squid Cable dc squid cable, squid cable, dc squid, squid cable female to male, female to male squid, 1 female to 6 male dc cable
            CBL-DCSQUID
            Price: $9.95 In Stock
            Item #: CBL-DCSQUID -

              Do you want to attach multiple devices to a single power supply, but don't want to splice and solder them all together? Then check out the DC Squid Cable. With this cable you can plug up to 6 devices up to one DC power supply. For example, you could connect 6 Arduino boards up to one power supply. Each barrel jack connector is 2.1*5.5mm. making it compatible with out many power supplies and wiring harnesses. Please keep in mind that it is up to the user to determine that the power supply can...

              RobotGeek Light Sensor robotgeek light sensor, photocell, light sensor, robotgeek, arduino light sensor, arduino photocell
              ASM-RG-LIGHT
              Price: $3.95 In Stock
              Item #: ASM-RG-LIGHT -

                This RobotGeek Light Sensor is an analog sensor that will allow you to measure light from your Arduino or other microcontroller. The more light the sensor detects, the higher the your analog port will detect. Each RobotGeek Light Sensor comes with a dual female-female jumper cable so that you can move the light sensor off the board. This makes placing your sensors easier than ever. You can use this sensor to measure the ambient light in a room, or to measure the relative brightness of...

                12 Inch Stroke 110 LB Linear Actuator with Feedback Linear Actuator, push actuator, SPAL
                M-200-50-5-1577-12
                Price: $113.95 In Stock
                Item #: M-200-50-5-1577-12 -

                  This is a 12V DC 110lb Linear Actuator from Creative Werks. (part number LACT2P) These are reliable, well built tough linear actuators. The sturdy mounting brackets make them easy to mount and won't break. If you are looking for a basic manual controller we recommend the Linear Actuator Controller kit. If you are looking to control these from an Arduino we recommend checking out the Arduino Linear Actuator tutorials below! Arduino Linear Actuator Tutorials: Preset Position Button Control of a...

                  Barrel Jack Male Pigtail Lead 2.1*5.5*12mm barrel jack male, pigtail lead, power cable, cable, pigtail power,
                  CBL-PIGTAIL
                  Price: $2.95 In Stock
                  Item #: CBL-PIGTAIL -

                    The Barrel Jack Male Pigtail Lead 2.1*5.5*12mm is the perfect companion to any 2.1*5.5mm female power jack. Whether you need to hook up to an Arduino/Geekduino Board, a Female Pigtail Lead or the AX/MX Power Hub, this cable has you covered. The tail is 10" long and splits easily.

                    Barrel Jack Female Pigtail Lead 2.1 - 5.5mm Barrel Jack Female Pigtail Lead 2.1 - 5.5mm
                    CS-CT5089
                    Price: $2.95 In Stock
                    Item #: CS-CT5089 -

                      Quickly power up to terminal blocks or solder these to your homemade switch harnesses. The tail is 10" long and splits easily.

                      Linear Actuator Mounting Bracket spal, linear actuator, mounting bracket
                      M-200-50-5-1577-B
                      Price: $14.25 In Stock
                      Item #: M-200-50-5-1577-B -

                        This mounting bracket will not work for Firgelli, Actuonix or Mighty Zap linear actuators and is only intended for Creative Werks linear actuators. LINEAR ACTUATOR MOUNTING BRACKET SPAL part number LA-BRACKET-110A mounting bracket kit for use with SPAL/Creative Werks LACTP series linear actuators. Bracket and mounting pad are made from billet aluminum. Includes hardware. NOTE: This is a single bracket. If you need to mount both ends of your linear actuator you will need two brackets....

                        RobotGeek Buzzer arduino buzzer, arduino buzzer board, arduino speaker, arduino piezo, arduino piezo board
                        ASM-RG-BUZZER
                        Price: $3.95 In Stock
                        Item #: ASM-RG-BUZZER -

                          Get buzzing with this Arduino Buzzer! The RobotGeek Buzzer is an easy way to add audio output to your Arduino. By simply sending a 5v signal to the RobotGeek Buzzer, the device will emit a tone. You can also use the Arduino Tone Function to send different tones to the buzzer. NOTE:some frequencies will work better than others with this piezo buzzer. This Arduino Buzzer has the standard RobotGeek three pin connection so it plugs right into the RobotGeek Sensor Shield to get you up and running...

                          Dual Linear Actuator Controller spal, linear actuator, actuator controller, wiring harness
                          M-200-50-5-1577-C
                          Price: $119.95 In Stock
                          Item #: M-200-50-5-1577-C -

                            LINEAR ACTUATOR CONTROLLER KIT Creative Werks linear actuator controller kit for use with Creative Werks LACTP series linear actuators. Pushbuttons give manual control of travel and can also be programmed to move actuator to any of three determined preset positions. Indicator light shows at which of these custom presets unit is currently positioned. Once programmed the display unit can be removed and three SPST momentary switches (not included) added to make actuator move to preset positions...

                            Female Dean to Female Barrel Plug Cable female dean, female barrel plug, power cable, cable
                            CBL-FDEANFBA
                            Price: $3.95 In Stock
                            Item #: CBL-FDEANFBA -

                              LiPo batteries are great for building robots, but using them to power your cralwer during development can be problamatic. Instread, use the Female Dean to Female Barrel Plug Cable to connect your robot to a DC power supply. Just plug the 2.1*5.5 female barrel jack into any of our SMPS Power supplies and the female dean connector into yor project and you'll be able to test for long streches without having to recharge your battery. Keep in mind that LiPo batteries can source alot of current, so...

                              10 Foot Extension Wire spal, linear actuator, actuator controller, wiring harness
                              M-200-50-5-1577-H
                              Price: $25.95 In Stock
                              Item #: M-200-50-5-1577-H -

                                10 FOOT EXTENSION HARNESS Creative Werks part number LA-EXTHARN. Ten foot wiring harness allows a Creative Werks 12 VDC 110 lb. linear actuator to be mounted up to ten feet away from the actuator controller. SPECIFICATIONS 10 feet long Shpg. 1/4 lb.

                                10x 100mm Aluminum M3 Standoff F/F 100mm, metal, Aluminum, M3, Standoff, F/F, female to female, female, 10cm
                                ASM-FF100
                                Price: $6.95 In Stock
                                Item #: ASM-FF100 -

                                  Need to make a really tall robot? Not enough horizontal space on your workbench and you want to expand vertically? Is your Geekbot tall, but not quite imposing enough? With the 100mm Aluminum M3 Standoff F/F, you can add a whopping 10 centimeters in height to your project. Made of solid Aluminum these are light and strong, giving you a sturdy mounting point for any project! This pack includes eight Standoffs, which is enough to make your geekbot, snapper, or turret taller. ...

                                  10x 100mm Aluminum M3 Standoff M/F 100mm, metal, Aluminum, M3, Standoff, M/F, male to female, male, female, extension
                                  ASM-MF100
                                  Price: $6.95 In Stock
                                  Item #: ASM-MF100 -

                                    Need to make a really tall robot? Not enough horizontal space on your workbench and you want to expand vertically? Is your Geekbot tall, but not quite imposing enough? With the 100mm Aluminum M3 Standoff M/F, you can add a whopping 10 centimeters in height to your project. Made of solid Aluminum these are light and strong, giving you a sturdy mounting point for any project! This pack includes eight Standoffs, which is enough to make your geekbot, snapper, or turret taller. With the male end,...

                                    RobotGeek Voltage Divider RobotGeek Voltage Divider, Robot Geek Voltage Divider, Voltage Divider, FSR Voltage Divider, Force Sensitive Resistor Voltage Divider, FSR Interface, FSR Analog Interface
                                    ASM-RG-VOLTDIV
                                    Price: $4.95 In Stock
                                    Item #: ASM-RG-VOLTDIV -

                                      The RobotGeek Voltage Divider is a simple yet effective way to turn a variable resistor, such as an FSRs, Softpots, or Pressure Sensors into a tunable 0-5v analog signal. The design is super simple and completely open source, but saves tinkerers from having to breadboard a potentiometer of their own. A 2 position terminal block and 0.1" spaced header are available for sensor input, a 3 pos right angle header breaks out Analog output, 5v input, and Gnd. Each sensor includes necessary...

                                      FSR Kit Combo
                                      KIT-S-20-1000-FSRKT
                                      Price: $32.25 In Stock
                                      Item #: KIT-S-20-1000-FSRKT -

                                        This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

                                        .2 Inch FSR Kit force sensor
                                        KIT-S-20-1000-FSRKT2
                                        Price: $14.35 In Stock
                                        Item #: KIT-S-20-1000-FSRKT2 -

                                          This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

                                          .5 Inch FSR Kit force sensor
                                          KIT-S-20-1000-FSRKT5
                                          Price: $14.95 In Stock
                                          Item #: KIT-S-20-1000-FSRKT5 -

                                            This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

                                            2.1/5.5mm Jack to 2.5/5.5mm Plug Adapter 2.1/5.5mm Jack to 2.5/5.5mm Plug Adapter
                                            POW-plug-adapter
                                            Price: $3.95 In Stock
                                            Item #: POW-plug-adapter -

                                              This is an adapter that converts a 2.1/5.5mm Jack into a 2.5/5.5mm Plug. This will adapt our 2.1/5.5mm plug power supplies into a 2.5/5.5mm plug.

                                              1.5 Inch FSR Kit force sensor
                                              KIT-S-20-1000-FSRKT15
                                              Price: $16.25 In Stock
                                              Item #: KIT-S-20-1000-FSRKT15 -

                                                This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

                                                24 Inch Strip FSR Kit force sensor
                                                KIT-S-20-1000-FSRKT24
                                                Price: $26.00 In Stock
                                                Item #: KIT-S-20-1000-FSRKT24 -

                                                  This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

                                                  Rubber Bumpers - Large rubber bumpers, large rubber bumpers, rubber feet, large rubber feet
                                                  ASM-12-RW-KSH0433
                                                  Price: $4.95 In Stock
                                                  Item #: ASM-12-RW-KSH0433 -

                                                    Large Rubber Bumpers are great for any project! Whether you need some traction on the bottom of your project or a little more clearance for nuts bolts and wires underneath your project, these bumpers will do the job. These bumpers have an adhesive backing that makes them easy to attach to any surface. Bumpers are 20mm*20mm on the larger face (this face has the adhesive backing) , 14mm*14mm on the smaller/bottom face and 9mm tall. Each pack comes with 12 individual bumpers. ...