Sharp IR Distance Sensor GP2Y0A41SK0F (4-30CM)
Price: $10.95

    The Sharp IR Distance Sensor GP2Y0A41SK0F is a great low cost robotic range-finder. The Distance Sensor will report the presence of an object 4-30cm away from the sensor. The sensors reports this data as an analog value readable by most microcontrollers, like the Arduino. This sensor can plug directly into a RobotGeek Sensor Shield using a Sharp IR to Servo Cable. This cable can also be handy to connect to other systems and controllers (users can cut/splice the wire). If you want to use this...

    PIR Wide Angle Sensor
    Price: $10.99

      The PIR(Passive Infra-Red) Sensor is a pyroelectric device that detects motion by sensing changes in the infrared(radiant heat) levels emitted by surrounding objects.Each Wide Angle PIR Sensor cable includes a 4-pin cable, as well as a mount and hardware to adapt to all RobotGeek products with a centimeter grid pattern (Workbenches, Geekbot, etc.). Mount it at a right angle, and flat.Product FeaturesSingle bit output Small size On-board LEDs Power 3V to 6VDC operation 150uA idle, 3mA active(no...

      RobotGeek 9G Snapper Mini - 3D Printed Arm
      Price: $55.95

        × *Please Note: RobotGeek Snapper Mini is intended to be 3D printed. Make sure you have access to a 3D printer or 3D printing service before purchasing this kit.* Download the 3D files from our Thingiverse The RobotGeek Snapper Mini - 9G Servo 3D printable Robot arm is a fully 3D printable robot arm kit! The kit comes with all of the servos hardware and base to assemble the arm, all you need to do is print the rest and assemble! The Snapper Mini works off the same code as the full Snapper kit...

        2A Dual Motor Controller Motor, Driver, 2A, Dual, Controller
        Price: $17.05

          This is a 4.8-46V, 2A Dual Motor Controller which is the revised version of the DF-MDV1.0. Its performance has been improved greatly. It can bear larger current due to the increased heatsink dissipation. It is easy to control, using LGS's outstanding high-power motor driver chip, the L298N. This chip allows for direct drive of two bi-directional DC motors, and incorporates high-speed short diodes for protection. Drive current up to 2A per motor output. The driver uses a broad-brush design to...

          Fitec FS90R Continuous Rotation Servo Fitec FS90R Continuous Rotation Servo, continuous rotation servo, servo, 9g servo, 9g continuous rotation servo
          Price: $4.95

            The FS90R is a micro, continuous rotation servo that can produce 1.5kg-cm (21 oz-in) of torque at 130 RPM running at 6v. It is a great solution for a micro-sized rover.The servo includes hardware, five different servo horns and has a 200mm (8") JR-style connector lead for direct connection into a single microcontroller I/O line.

            Gravity: Analog Capacitive Soil Moisture Sensor- Corrosion Resistant Analog, Capacitive, Soil, Moisture, water, Sensor, Corrosion, Resistant, dfrobot
            Price: $7.90

              The Analog Capacitive Soil Moisture Sensor measures soil moisture levels by capacitive sensing, rather than resistive sensing like other types of moisture sensor. It is made of a corrosion resistant material, giving it a long service life. Insert it into soil and impress your friends with the real-time soil moisture data! The product includes an on-board voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V. It is compatible with low-voltage MCUs (both 3.3V and 5V logic)....

              PC USB Interface for Mighty Zap Linear Actuators PC, USB, Interface, controller, Mighty, Zap, Linear, Actuator, Servo, control, serial, TTL, IR Robot
              Price: $50.00

                The PC USB Interface for Mighty Zap Linear Actuators is an interface board to control parameters with a PC. Easily test, control, and manage your Mighty Zap Linear Actuators with the Servo Manager Software! Features: Operation parameter setting Storage memory setting Error indication setting System reset Firmware update Works with: Mighty Zap 30mm Stroke 7.4V 6N TTL / PWM Mini Linear Actuator Servo Mighty Zap 30mm Stroke 7.4V 12N TTL / PWM Mini Linear Actuator Servo Mighty Zap 30mm Stroke 12V...

                RobotGeek Arduino RFID Windows Login Kit RobotGeek, RFID, Windows, Login, Kit, 8, windows 8, windows 7, windows 10, rfiduino, robot, geek, kb, vista
                Price: $49.95

                  The RobotGeek RFID Windows Login Kit gives you the power to log into your Windows (Vista, 7, 8, or 10) Personal Computer using a quick and easy RFID tag swipe! Our detailed tutorial will guide you through the process to install the login files on your PC as well as get the Windows Login Firmware on your Geekduino. When swiped, your RFIDuino and Geekduino will pass the tag information onto your PC. Any tags that match your setup files will activate the login software and log you into your...

                  USB 3.0 A to Micro B Cable - 1.5ft USB 3.0 A to Micro B Cable - 1.5ft, usb 3.0, usb 3.0 a, usb 3.0 a to micro b, usb micro b, usb charge cable
                  Price: $2.95

                    USB 3.0 A to Micro B cable.

                    Lithium Ion Battery 7.4v 2200mAh (2S2P) with PCM Lithium, Ion, li-ion, lion, Battery, 7.4V, 2200mAh, 2S2P, PCM, Charger, Samsung, cells
                    Price: $19.95

                      Power up your rover, or take your robot arm off the grid with the 7.4V 2200mAh Lithium Ion Battery! This battery has excellent capacity for robotics projects utilizing several RobotGeek Servos. To make it easy to connect/disconnect the battery from your project, each of these batteries has a Female T-Connector (Deans Ultra Plug compatble), and for easy charging, a barrel Jack for use with the Charger with over-voltage protection (included). If discharged too low, Lithium Ion batteries can...

                      Resistive Flex Sensor 2.2 Inch Flex sensor, 2.2 inch flex sensor, small flex sensor, nintendo power glove, flexible sensor, resisitve sensor, spectra,
                      Price: $7.95

                        The little brother to the 4.5" Flex Sensor, the 2.2" Flex Sensor is just as fun! This sensor's diminutive size makes it great for all sorts of small spaces. The flex sensor changes its resistance as its flexed, so you can easily create an analog signal to connect to your microcontroller. We recommend using our Voltage Divider to easily create that signal. The connector is .1"/2.5mm spaced, so it will work with standard breadboards. We recommend that you reinforce the base of the sensor when...

                        Resistive Flex Sensor 4.5 Inch
                        Price: $12.95

                          Description: A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It's so bad! The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). Straight (unflexed) resistance: ~9000 Ohm 90 degree bend resistance: ~14000 Ohm 180 degree bend...

                          RFIDuino Shield V1.2 Arduino RFID Shield, RFID Arduino, Arduino RFID, RFID Shield for Arduino, Arduino EM4102, Arduino RFID reader, V1.2
                          Price: $17.50-$34.95

                            This page is for the RFIDuino V1.2. Visit this guide to see the differences between the Version 1.1 and 1.2 Hardware. The RFIDuino is an Arduino RFID Shield which makes Arduino RFID projects super easy to build. Just drop the RFIDuino Shield onto your Arduino microcontroller, load our sample code, and you'll be reading tags in no time! Our getting started guide will take you through the process of working with the RFIDuino from loading basic code to more advanced projects like triggering...

                            Robot Geek Small Workbench Robot Geek Small Workbench
                            Price: $7.95

                              Robot Geek Workbenches are versatile platforms that allow for building modular projects quickly. All Robot Geek products and kits conform to the standard 1 X 1 CM hole pattern grid allowing builders to custom build their projects any way they desire. An infinite number of configurations are possible! The Small Robot Geek Workbench comes with: Small Workbench Plate (16 X 15 CM) 4 X Large Rubber Bumpers

                              RobotGeek Chip-E - Open Source Arduino 3D Printed Robot arduino robot, arduino kit, arduino 3d print, 3d print robot, 3d printed robot
                              Price: $189.95

                                × *Please Note: Chip-E is intended to be 3D printed. Make sure you have access to a 3D printer or 3D printing service before purchasing this kit. If you do not have access to a 3D printer please refer to our guide on the bottom of the page on how to acquire the 3D printed parts.* Chip-E is RobotGeek’s first 3D printable robot kit that you can build yourself! Powered by the RGS-13 servos and the RobotGeek Geekduino and Sensor Shield components Chip-E is a cute and lovable walking companion that...

                                RobotGeek 180 Degree Robot Servo robot servo, 180 degree robot servo, robotgeek servo, robotgeek robot servo, robotgeek 180 degree servo, 180 degree servo
                                Price: $24.95

                                  Get ready to bring your robotic dreams to life with the RobotGeek 180 Degree Robot Servo! This metal-geared servo is perfect for building robotic joints and will help you create your own custom robotic arms, crawlers, and more! And because these servos use a standard PWM signal for control, they're easy to directly interface with microcontrollers like the Arduino! RobotGeek Servo by RobotGeek on Sketchfab Idler Horn The difference between a regular servo and robot servo is the Idle Horn. This...

                                  RobotGeek Arduino Experimenters Kit Core Arduino Experimenters Kit, Basic Arduino kit, arduino mount kit, Experimenters Kit, core, parts, geekduino
                                  Price: $19.95

                                    The RobotGeek Basic Experimenter's Kit Core Is the most basic package in the RobotGeek system. This kit gives you the Sensor Shield, the Large Workbench, power supply, USB cable, RobotGeek Sensor Cables, and all the mounting hardware necessary for a solid framework to build a project of your design with. You can add a Geekduino or use the core kit with your own Arduino microprocessor. This kit comes with no modules, sensors, servos, input, or output devices. It is intended for those who have a...

                                    RobotGeek Geekduino
                                    Price: $22.50

                                      The Geekduino is the new Arduino Compatible board from RobotGeek! This board goes into every RobotGeek Robot Kit and is the perfect microcontroller for your next robotic project! The Geekduino uses the ubiquitous Micro USB port to power and program the board. The Geekduino can also be powered via the ultra low-profile flat DC power jack. A series of switches allows you to toggle on/off the Geekduino's FTDI reset (handy for software projects) as well as change the operating voltage of the...

                                      RobotGeek Sensor Cable Pack robotgeek, robotgeek sensor pack, robotgeek sensor cable pack, robotgeek cable pack, servo wire, 2 pin jumpers, sensor squid, pin couplers, jr female, y cable, variety pack
                                      Price: $24.95

                                        The Robot Geek Sensor Cable Pack will hook you up with all your sensor and servo wiring needs and beyond. This variety cable pack includes: 3x 3 Pin Female to Female Y Cable 1x 32 Foot Standard Servo Wire 20x 3 Pin Sensor Cable 10x 2 Pin Dual-Female Jumper Wires (300mm) 10x Sensor Squids 25x 2-Pin Couplers 25x 3-Pin Couplers ...

                                        Switch - Floor Mat - Single Strip
                                        Price: $4.45

                                          The Floor Mat Switch works by spacing two strips of metal apart with thin squares of foam in-between them every .75 inches. The pairs of metal strips are spaced out 2.5 inches from each other for the length of the mat. When someone steps on the mat their weight presses the two metal strips together creating a closed contact. All the strips are connected down both sides of the mat creating one large switch. The individual strips can be cut apart to create individual switches and the mat itself...

                                          Mighty Zap 30mm Stroke 12V 12N TTL / PWM Mini Linear Actuator Servo Mighty, Zap, 30mm, Stroke, 12V, 12N, TTL, PWM, Mini, Linear, Actuator, Servo
                                          Price: $85.00

                                            Large sized AC powered linear servo motors have been used widely in various industrial applications. However compact linear servo motors with DC power have had limited applications due to limited force, speed, accuracy and durability - despite high market demand. Say goodbye to limitations with the Mighty Zap 30mm Stroke 12V 12N TTL / PWM Mini Linear Actuator Servo! The Mighty Zap Series from IR Robot outperforms other linear actuators by virtually every metric, making them a fantastic choice...

                                            Mighty Zap 30mm Stroke 12V 6N TTL / PWM Mini Linear Actuator Servo Mighty, Zap, 30mm, Stroke, 12V, 6N, TTL, PWM, Mini, Linear, Actuator, Servo
                                            Price: $85.00

                                              Large sized AC powered linear servo motors have been used widely in various industrial applications. However compact linear servo motors with DC power have had limited applications due to limited force, speed, accuracy and durability - despite high market demand. Say goodbye to limitations with the Mighty Zap 30mm Stroke 12V 6N TTL / PWM Mini Linear Actuator Servo! The Mighty Zap Series from IR Robot outperforms other linear actuators by virtually every metric, making them a fantastic choice...

                                              Mighty Zap 30mm Stroke 7.4V 12N TTL / PWM Mini Linear Actuator Servo Mighty, Zap, 30mm, Stroke, 7.4V, 7v, 12N, TTL, PWM, Mini, Linear, Actuator, Servo
                                              Price: $85.00

                                                Large sized AC powered linear servo motors have been used widely in various industrial applications. However compact linear servo motors with DC power have had limited applications due to limited force, speed, accuracy and durability - despite high market demand. Say goodbye to limitations with the Mighty Zap 30mm Stroke 7.4V 12N TTL / PWM Mini Linear Actuator Servo! The Mighty Zap Series from IR Robot outperforms other linear actuators by virtually every metric, making them a fantastic choice...

                                                Mighty Zap 30mm Stroke 7.4V 6N TTL / PWM Mini Linear Actuator Servo Mighty, Zap, 30mm, Stroke, 7.4V, 7v, 6N, newtons, TTL, PWM, Mini, Linear, Actuator, Servo
                                                Price: $85.00

                                                  Large sized AC powered linear servo motors have been used widely in various industrial applications. However compact linear servo motors with DC power have had limited applications due to limited force, speed, accuracy and durability - despite high market demand. Say goodbye to limitations with the Mighty Zap 30mm Stroke 7.4V 6N TTL / PWM Mini Linear Actuator Servo! The Mighty Zap Series from IR Robot outperforms other linear actuators by virtually every metric, making them a fantastic choice...

                                                  EM4102 Tag Kit
                                                  Price: $11.95

                                                    Kit Includes: 1 x Credit Card Thin Card (ISO) 1 x Thick Card (Clamshell) 1 x Inventory Label - Square Version (38 x 38 mm) 1 x 18mm Button with Sticker Backing 1 x 35mm White Disk with Hole 1 x 30mm Global Tag (black) 1 x 25mm White Disk 1 x 25mm White Disk (sticker backing) 1 x 30mm Clear Thin Lamination Disk 1 x 30mm Clear Thin Lamination Disk (sticker backing) 1 x 25mm Clear Thin Lamination Disc 1 x Blue Key Fob 1 x Wristband Watch Style *Tags might change depending on availability, but...

                                                    Lithium Ion Battery 7.4V 4400mAh (2S2P) with PCM and Charger Lithium, Ion, li-ion, lion, Battery, 7.4V, 4400mAh, 2S2P, PCM, Charger, Samsung, cells
                                                    Price: $39.95

                                                      Power up your rover, or take your robot arm off the grid with the 7.4V 4400mAh Lithium Ion Battery! This battery has excellent capacity for robotics projects utilizing several RobotGeek Servos. To make it easy to connect/disconnect the battery from your project, each of these batteries has a Female T-Connector (Deans Ultra Plug compatble), and for easy charging, a barrel Jack for use with the Charger with over-voltage protection (included). If discharged too low, Lithium Ion batteries can...

                                                      Robot Geek Large Workbench Robot Geek Large Workbench
                                                      Price: $8.95

                                                        Robot Geek Workbenches are versatile platforms that allow for building modular projects quickly. All Robot Geek products and kits conform to the standard 1 X 1 CM hole pattern grid allowing builders to custom build their projects any way they desire. An infinite number of configurations are possible! The Large Robot Geek Workbench comes with: Large Workbench Plate (21 X 22 CM) 8 X Large Rubber Bumpers

                                                        RobotGeek 150mm 3-pin Sensor Cable 10 pack
                                                        Price: $4.95

                                                          RobotGeek Sensor Cables are for use with all RobotGeek sensors, shields, servos, and output devices. These cables are .1"(2.54mm) pitch and are 150mm in length with color coded wires. Add some 3-Pin Couplers to connect cables together for extension cables. These cables are also compatible with Phidgets Sensors and Electronic Brick Sensors, though they do not have the plastic buckle like traditional Phidgets/Electronic Brick Cables. ...

                                                          RobotGeek Arduino Basic Experimenters Kit RobotGeek, robot, geek, Geekduino, arduino, starter, Basic, Experimenters, Kit
                                                          Price: $49.95

                                                            The RobotGeek Geekduino Basic Experimenter's Kit is an inexpensive introduction to the RobotGeek System which covers a great deal of the basics of Arduino programming. This kit, in combination with the RobotGeek 101 series of tutorials, provides a clear route to learning about Analog and Digital Inputs and Outputs, Sensors, Lights and Servos. The carefully selected components in this kit will put the power of learning and creativity at hand! At the core of the RobotGeek Arduino kits is the...

                                                            RobotGeek Continuous Rotation Servo robotgeek 360 degree robot servo, robotgeek continuous servo, robotgeek robot servo, robot servo, robotgeek servo, continuous robot servo, continuous servo,Continuous Rotation
                                                            Price: $24.95

                                                              Get ready to bring your robotic dreams to life with the RobotGeek Continuous Rotation Servo! This metal-geared servo is perfect for building robotic rovers, spinners and more! And because these servos use a standard PWM signal for control, they're easy to directly interface with microcontrollers like the Arduino! Idler Horn The difference between a regular servo and robot servo is the Idle Horn. This horn will spin freely and is at the opposite position of the main drive horn. The idler horn...

                                                              RobotGeek Sensor Shield ( Version 2 ) RobotGeek Sensor Shield, V2, Version 2, Arduino Sensor Shield, Scratch Sensor Shield, Arduino Bricks, Arduino Sensors, Arduino Motors, Arduino Starter Kit
                                                              Price: $7.95

                                                                The Arduino Platform is a great way for learning about electronics and programming, as well as creating microcontoller based projects. But even simple projects can get messy very quickly, leaving you with a pile of wires, breadboards, and components. With the RobotGeek Sensor System, you can put your project on the fast track and get it up and running in no time. The RobotGeek Sensor Shield will fit on any Standard Arduino Compatible board*, and break out the digital and analog pins into easy...

                                                                RobotGeek Snapper Arduino Robotic Arm Arduino Robot arm, hobby Robot Arm, Arudino Robotic Arm, programmable Arduino robot arm, programmable hobby robot arm
                                                                Price: $229.95

                                                                  The Snapper Robot Arm is a perfect entry level kit for getting started with Arduino and robotics. This Arduino Robot Arm is aimed at those looking for robot kits for hobby and education. The Snapper is based on the open source Arduino controller and the extremely modular RobotGeek family of parts, sensors, and components. The robot arm can be easily modified and upgraded for many different types of projects. The Geekduino (the RobotGeek Arduino compatible microcontroller board) controls each...

                                                                  Sharp IR Distance Sensor - GP2D12 Alternative (10-80 cm) Sharp, IR, Distance, Sensor, GP2D12, (4-30 inches)
                                                                  Price: $12.95

                                                                    One of the most favored IR range sensors on the market. Detects distances from 4" to 30" (10cm-80cm). Note: The sensor sold here is actually a Sharp IR GP2Y0A21YK0F. It has the same distance range as a GP2D12 and very similar analog output properties. The GP2D12 is extremely difficult to source currently, so these sensors provide a great alternative. For more information on the minor differences, please refer to the datasheets for each sensor: Datasheets GP2D12 Datasheet GP2Y0A21YK0F...

                                                                    Softpot Rotary Potentiometer
                                                                    Price: $14.95

                                                                      These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. Unit comes with adhesive...

                                                                      Switch - Floor Mat - 14 Inches x 30 Inches
                                                                      Price: $19.95

                                                                        The Floor Mat Switch works by spacing two strips of metal apart with thin squares of foam in-between them every .75 inches. The pairs of metal strips are spaced out 2.5 inches from each other for the length of the mat. When someone steps on the mat their weight presses the two metal strips together creating a closed contact. All the strips are connected down both sides of the mat creating one large switch. The individual strips can be cut apart to create individual switches and the mat itself...

                                                                        FS90 Analog Micro Plastic Gear Servo FS90 Analog Micro Plastic Gear Servo, analog micro servo, plastic gear servo, 9g plastic servo, 9g servo, micro servo, analog servo, 9g micro servo
                                                                        Price: $6.95

                                                                          Need a tiny servo for a tiny task? Try the FS90 Micro Plastic Gear Servo! This servo is great for scanning type sensors, tiny robots, and more! Each servo comes with a variety of horns. These servos use a standard PWM signal to control them. The Arduino does a great job of controlling PWM Servos, making it ideal for a variety of robotic projects. But sometimes powering these servos can be problematic. Powering servos from the Arduino's 5v regulator leads to underpowered servos, limited by both...

                                                                          Lithium-ion Battery Charger Lithium-ion Battery Charger
                                                                          Price: $12.95

                                                                            Standard Lithium-Ion Battery Charger intended for use with the Lithium Ion Battery 7.4v 2200mAh (2S2P) with PCM.

                                                                            RFID EM4200 25mm Clear Plastic Disk
                                                                            Price: $0.79

                                                                              RFID EM4200 25mm Clear Plastic Disk Frequency 125 kHz Protocol EM4102 Read / Write Read only EEPROM Capacity 64 Bits Dimensions 25mm diameter / approx 1mm thickness Read Range 76.2mm ...

                                                                              300mm 3-pin Female Sensor Cable 10 pack
                                                                              Price: $4.95

                                                                                RobotGeek Sensor Cables are for use with all RobotGeek sensors, shields, servos, and output devices. These cables are .1"(2.54mm) pitch and are 300mm in length with color coded wires. Add some 3-Pin Couplers to connect cables together for extension cables. These cables are also compatible with Phidgets Sensors and Electronic Brick Sensors, though they do not have the plastic buckle like traditional Phidgets/Electronic Brick Cables. ...

                                                                                RobotGeek 4 Line I2C LCD Control Panel RobotGeek, 4 Line, I2C, LCD, Control, Panel, buttons, 9mm, large, screen, display
                                                                                Price: $18.95

                                                                                  Need a control panel for your next project? The RobotGeek 4 Line LCD Control Panel is a great choice! With a 4 line LCD Display, you'll have enough room to display menu lists, lots of sensor readouts, pictures, and more! On each side of the display are 4 buttons. The left buttons are marked for moving up and down, and the right two buttons make great select and back buttons. Like the rest of the RobotGeek line, this control panel is compatible with the 1cm x 1cm grid found on RobotGeek...

                                                                                  RobotGeek Arduino Basic+ Experimenters Kit RobotGeek, robot, geek, Geekduino, arduino, Basic+, basic, plus, Experimenters, Kit, starter
                                                                                  Price: $79.95

                                                                                    The RobotGeek Geekduino Basic+ Experimenter's Kit is the most comprehensive and robust of all the Geekduino Basic kits. Why Basic+? You can cover the basics of Arduino programming with an in-depth introduction to the RobotGeek system, and more than the Basic kit, you can learn about a wide variety of Analog and Digital Inputs and Outputs, Lights and Servos, Sensors, and even learn about I2C communication and Displays! At the core of the RobotGeek Arduino kits is the workbench to mount your...

                                                                                    RobotGeek Double Wide Workbench RobotGeek, robot, geek, Double, 2x, Wide, Workbench, large, centimeter, grid, mounting, plate
                                                                                    Price: $14.95

                                                                                      Is your large workbench feeling cramped with all the RobotGeek Sensors you've added to it? Never fear, the RobotGeek Double Wide Workbench covers it! Just as tall and twice as wide as a RobotGeek Large Workbench at 44x21 Centimeters. Robot Geek Workbenches are versatile platforms that allow for building modular projects quickly. All Robot Geek products and kits conform to the standard 1 X 1 CM hole pattern grid allowing builders to custom build their projects any way they desire. An infinite...

                                                                                      RobotGeek Snapper Core Arduino Robot Arm RobotGeek, robot, geek, Snapper, Core, Kit, robotic, arm, robotic arm, Arduino Robot Arm
                                                                                      Price: $169.95

                                                                                        The RobotGeek Snapper Core Kit is the base arm hardware and servos necessary to build a snapper arm, for those who already have a microprocessor board such as a Geekduino/Arduino. If you would like a full kit that contains a microprocessor board and input modules, check out the RobotGeek Snapper Arm Kit. This core kit contains all the arm hardware, including a 120mm Slewing Bearing, RobotGeek 180 degree servos, and all the necessary brackets, mounts, body parts, nuts, bolts, and wires you need...

                                                                                        Sharp IR Distance Sensor GP2Y0A02YK (20-150 cm)
                                                                                        Price: $15.00

                                                                                          This sensor takes a continuous distance reading and reports the distance as an analog voltage with a distance range of 20cm (~8") to 150cm (~60"). The interface is 3-wire with power, ground and the output voltage and requires a JST 3-pin connector (not included). The JST 3-pin connector includes the J3 connector for the sensor and bare wires at the other end, and requires that the processor or ADC-side connector be purchased or built separately. For most applications we recommend...

                                                                                          SoftPot Linear Potentiometer - 50mm
                                                                                          Price: $12.95

                                                                                            These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. Unit comes with adhesive...

                                                                                            Switch - Floor Mat - 5 feet x 30 Inches
                                                                                            Price: $74.95

                                                                                              The Floor Mat Switch works by spacing two strips of metal apart with thin squares of foam in-between them every .75 inches. The pairs of metal strips are spaced out 2.5 inches from each other for the length of the mat. When someone steps on the mat their weight presses the two metal strips together creating a closed contact. All the strips are connected down both sides of the mat creating one large switch. The individual strips can be cut apart to create individual switches and the mat itself...

                                                                                              Servo Cable
                                                                                              Price: $12.95

                                                                                                Our 32 Feet Standard Servo Wire is great for repairing and extending servo and sensor cables. The Futaba Black-Red-White (Ground-Voltage-Signal) color scheme will help you keep your signals straight. This cable has 24awg stranded wire and no connectors on either end.

                                                                                                FS90MG Micro Metal Gear Servo Fitec FS90MG Micro Metal Gear Servo, metal gear servo, 9g servo, 9g metal gear servo, 9g micro metal gear servo, 9g metal servo, metal gear servo, micro servo
                                                                                                Price: $9.95

                                                                                                  Need a tiny servo for a tiny task? Try the FS90 Micro Plastic Gear Servo! This servo is great for scanning type sensors, tiny robots, and more! Each servo comes with a variety of horns. The metal gears give this servo even more power and durability! These servos use a standard PWM signal to control them. The Arduino does a great job of controlling PWM Servos, making it ideal for a variety of robotic projects. But sometimes powering these servos can be problematic. Powering servos from the...

                                                                                                  LiPo/Li-ion Battery Wiring Harness battery, wiring, harness, power, dean plug, barrel plug, battery link, lipo battery harness, lipo harness
                                                                                                  Price: $8.95

                                                                                                    Easily link your project to a LiPo/Li-ion battery with the Battery Wiring Harness! This harness is the same one we use in our Hexapod and Quadruped kits. Just attach the male Dean connector to any of our LiPo/Li-ion Batteries and the barrel jack plug into your project, and you're ready to go! The harness even has a built in switch to quickly shut down power to your project. The switch is easily mountable - just cut a 6mm hole into your project and use the included nut and washer to securley...

                                                                                                    RFID EM4200 25mm Clear Plastic Disk (Sticker Backing)
                                                                                                    Price: $0.79

                                                                                                      RFID EM4200 25mm Clear Plastic Disk (Sticker Backing) Frequency 125 kHz Protocol EM4102 Read / Write Read only EEPROM Capacity 64 Bits Dimensions 25mm diameter / approx 1mm thickness Read Range 76.2mm ...

                                                                                                      RobotGeek 4 Line I2C LCD w/ Mount RobotGeek, 4 Line, LCD, Mount, display, backlight, backlit, blue, large, i2c
                                                                                                      Price: $14.95

                                                                                                        The RobotGeek 4 Line LCD w/ Mount is a perfect screen for your next project! With twice the space of the original RobotGeek LCD, you can easily display scrolling lists, paragraphs of text, or even make a tile-based game! The display can be easily mounted to projects and Workbenches. The bottom has the standard RobotGeek 1cm X 1cm grid making all RobotGeek products compatible with each other.

                                                                                                        RobotGeek Geekbot Arduino Compatible Rover Robot Geekbot Rover Comprehensive Kit, Robot Rover kit, Robotic Rover, basic, Arduino Rover, Arduino wheeled Platform, Arduino based Rover
                                                                                                        Price: $149.95

                                                                                                          The GeekBot Arduino Compatible Rover is a highly flexible wheeled rover created from the ground up to be completely modular and easy to customize. Powered by two high speed continuous turn robot servos, GeekBot has a strong payload capability of 1kg/2.2lbs and moves fast at up to 0.4Mps / 1.3fps. Each Geekbot comes with a 2200mah 7.4V rechargeable Lithium Ion battery, allowing your Geekbot to run for hours! Integrated protection circuitry protects the battery from under/over voltage. Each kit...

                                                                                                          RobotGeek Mega Workbench RobotGeek, Mega, large, Workbench, centimeter, grid, project
                                                                                                          Price: $24.95

                                                                                                            Have a really big project? The Robotgeek Mega Workbench is the solution! At a total whopping 44x42 centimeters, you'll have all the room you need for a project of epic proportions! It really can't be stated enough just how huge this thing really is. RobotGeek Workbenches are versatile platforms that allow for building modular projects quickly. All RobotGeek products and kits conform to the standard 1 X 1 CM hole pattern grid allowing builders to customize their projects any way they desire. An...

                                                                                                            SoftPot Linear Potentiometer - 100mm
                                                                                                            Price: $14.95

                                                                                                              These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. --> Unit comes with...

                                                                                                              RobotGeek Workbench Joiner Brackets RobotGeek, robot, geek, Workbench, Joiner, Plates, hardware, brackets
                                                                                                              Price: $4.95

                                                                                                                Have a couple RobotGeek Workbenches and a big project? The RobotGeek Workbench Joiner Brackets will do the trick! These are the same brackets included in the RobotGeek Mega Workbench that make it so mega. You can easily bolt together some workbenches for a larger footprint than would be capable with any single workbench. Kit Contents: 2 X Delrin Workbench Joiner Brackets 10 X M3x6 Bolts

                                                                                                                Foot Switch Foot, Switch, pedal, physical, input, computing, arduino, freeduino, seeeduino
                                                                                                                Price: $5.50

                                                                                                                  Building an electronic music project? Need to step on the gas? Perhaps this is the final component for your sub-orbital space fighter? Whatever your application is, this Foot Switch is perfect for all applications in need of a Foot Switch!

                                                                                                                  Parallax PIR Motion Sensor
                                                                                                                  Price: $9.99

                                                                                                                    The PIR Sensor detects motion up to 20 feet away by using a Fresnel lens and infrared-sensitive element to detect changing patterns of passive infrared emitted by objects in its vicinity. Inexpensive and easy to use, it's ideal for alarm systems, motion-activated lighting, holiday props, and robotics applications. The PIR Sensor is compatible with all Parallax microcontrollers; sample BS1, BS2, and SX/B programs and product documentation are available under Downloads (coming soon!). Features:...

                                                                                                                    Power Supply 6VDC 2.0A - US Power Supply 6VDC 2.0A, Power Supply, 6VDC, 2 amp
                                                                                                                    Price: $9.95

                                                                                                                      Power Supply for general project use.North American Style Plug6VDC, 2 Amp, Center Positive Polarity, 5.5x2.1MM

                                                                                                                      RFID EM4200 25mm Clear Plastic Disk (Doubled Sided Sticker Backing)
                                                                                                                      Price: $0.79

                                                                                                                        RFID EM4200 25mm Clear Plastic Disk (Double Sided Sticker) Frequency 125 kHz Protocol EM4102 Read / Write Read only EEPROM Capacity 64 Bits Dimensions 25mm diameter / approx 1mm thickness Read Range 76.2mm ...

                                                                                                                        RG90 Gear Motor RG90 Gear Motor, MOT-VIB08, Gear Motor, gearmotor, 6v gearmotor, 90rpm, 1:120, Arduino Motor, Robot Motor
                                                                                                                        Price: $5.95

                                                                                                                          Weighing in at just 35 grams, this RG90 Gear Motor can put put an impressive 1.2 kg/cm of torque! That makes it great for small, wheeled robots! The double-flat output shaft is 7mm in diameter and is perfect for attaching to our Gear Motor Wheel. Our gear motors come with two- 300mm wires pre-soldered onto the motor. Each wire is terminated with a 2.54mm female connector. This makes them ideal for attaching to any 2.54mm pin connector. ...

                                                                                                                          Antsy - 3 Servo Arduino Compatible Hexapod
                                                                                                                          Price: $229.95

                                                                                                                            *3D Printed shells not included There is a new robot crawling into town and they call it Antsy! Take one look and you can see inspiration for the design comes from a well-known insect, the ant. This hexapod design incorporates the use of three servos and a linkage system to produce locomotion at a fraction of the cost of other hexapod kits. RobotGeek Antsy Hexapod w/ Armor by RobotGeek on Sketchfab If you do not have access to a 3D printer, you may download the 3D files from our Thingiverse or...

                                                                                                                            RobotGeek Arduino RFID Experimenters Kit RobotGeek, robot, geek, Geekduino, arduino, starter, Experimenters, Kit, rfid, tag, shield
                                                                                                                            Price: $79.95

                                                                                                                              The RobotGeek RFID Experimenter's Kit is a strong introduction to the use of RFID tags in the Arduino environment. Utilizing the power of the Geekduino in conjunction with the RFIDuino Shield, this kit gives you access to the world of Radio Frequency Identification in a smart, easy way! Learn about triggering events with the swipe of an RFID tag in fun and exciting ways, even integrating household systems with use of the relay and LCD Display! As part of the RobotGeek Experimenter's line, the...

                                                                                                                              RobotGeek GeekBot Top Deck RobotGeek, robot, geek, GeekBot, bot, rover, Top, Deck, workbench
                                                                                                                              Price: $9.95

                                                                                                                                Spruce up your rover with the RobotGeek GeekBot V2 Top Deck! This 265mm diameter round deck has the standard 1 X 1 CM Robot Geek grid pattern making it easy to mount your sensors, batteries, ~duino boards, and accessories anywhere you need.

                                                                                                                                RobotGeek LCD w/ Mount RobotGeek LCD w/ Mount
                                                                                                                                Price: $7.95-$12.95

                                                                                                                                  The RobotGeek LCD is a fast and easy way to add text output to your projects. The enclosure can float freely on your desk or be mounted to projects and Workbenches. The bottom has the standard RobotGeek 1cm X 1cm grid making all RobotGeek products compatible with each other.

                                                                                                                                  Sensor Y Cable - 100mm sensor Y cable, sensor splitter cable, servo y cable, servo splitter cable
                                                                                                                                  Price: $1.95

                                                                                                                                    The Sensor Y Cable is a great tool for splitting a single signal to multiple output boards. These cables are 100mm long and use a standard .1"/2.54mm pitch, making them compatible with RobotGeek I/O boards, Hobby servos, and breadboards. With this cable you can easily connect from a single output port on the RobotGeek Sensor Shield to a RobotGeek Relay, a RobotGeek LED Driver or a RobotGeek Buzzer. Combine this cable with 2 3-Pin Couplers to easily connect from 1 port to 2 Hobby Servos. You...

                                                                                                                                    SoftPot Linear Potentiometer - 200mm
                                                                                                                                    Price: $17.95

                                                                                                                                      These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. --> Unit comes with...

                                                                                                                                      7v5A Power Supply
                                                                                                                                      Price: $11.95

                                                                                                                                        7VDC, 5 Amp Power Supply for general project use. Center Positive Polarity, 5.5x2.1MM barrel jack.

                                                                                                                                        Gear Motor w/ Wheel Set gear motor wheel set, gear motor,RG90 Gear Motor, MOT-VIB08, Gear Motor, gearmotor, 6v gearmotor, 90rpm, 1:120, Arduino Motor, Robot Motor
                                                                                                                                        Price: $18.50

                                                                                                                                          This kit is a combination of two RG 90 Gear Motors and two matching Gear Motor Wheels.The variety of mounting holes on the gear motors will make them easy to mount to almost any chassis. With a weight of 18g, this set is a great choice for small robots and rovers.

                                                                                                                                          Pixy cam front perspective photo
                                                                                                                                          Price: $89.95

                                                                                                                                            Vision Processing is a lot of work - even low resolution camera can output lots of data, and parsing through that data can be a lot of work. But don't worry, the CMUcam5 Pixy is here! The Pixy is a vision sensor that can quickly track colored objects and report back their X/Y position to your Arduino or other microcontroller. The Arduino can then take that data and control motors and other devices based on the position of the tracked objects. Add the Pixy to one of our Crawlers, Rovers,Turrets...

                                                                                                                                            Plastic Project Box and Mouting Hardware arduino project box, arduino box, arduino weather proof box, arduino water proof box, water proof arduino box, weather proof arduino box
                                                                                                                                            Price: $8.95

                                                                                                                                              The Project Box for Arduino is a great starter enclosure for your Arduino. This waterproof box can be used for logging purposes, or you can drill/paint/cut apart the box to suit whatever your needs are! A special mounting plate allows you to mount your Arduino and a shield in a variety of orientations with ease.

                                                                                                                                              25mm RFID Sticker
                                                                                                                                              Price: $0.79

                                                                                                                                                RFID EM4200 25mm White Round Sticker Frequency 125 kHz Protocol EM4102 Read / Write Read only EEPROM Capacity 64 Bits Dimensions 25mm diameter / approx 0.5mm thickness Read Range 76.2mm ...

                                                                                                                                                RobotGeek Arduino Display Experimenters Kit RobotGeek, Geekduino, Display, Kit, starter, arduino, robot, geek, grove, lcd, led, Experimenters, Kit
                                                                                                                                                Price: $119.95

                                                                                                                                                  The RobotGeek Geekduino Display Kit is a starter arduino based kit focused on controlling several different display outputs. Learn to control things that give you visual feedback. From simple LEDs, to a 4 digit display, an LCD screen, and an OLED screen, this comprehensive kit will teach you how get flashy and show off! The kit includes: 1x RobotGeek Large Workbench 1x Geekduino Mount / Hardware 1x RobotGeek Geekduino 1x RobotGeek Sensor Shield V2 1x USB To Micro USB Cable 1x 6v2a Power Supply...

                                                                                                                                                  RobotGeek Whegly - Arduino Compatible Wheg Robot Kit RobotGeek, Whegly, Arduino, Compatible, Wheg, Whegs, rover, wheel, legs, terrain, capable, Robot, Kit, ir, infrared, control, controller, controlled
                                                                                                                                                  Price: $229.95

                                                                                                                                                    The RobotGeek Whegly is an Arduino based, 4x wheg (wheel / leg) robot kit designed to overcome rougher terrain than your average wheeled robot. The open wheel design allows the Whelgy Robot to quickly change from a standard roll to climbing small obstacles wherever necessary. Whegly is powered by the RobotGeek Geekduino, 4x RobotGeek Continuous Rotation Servos and is constructed of a rigid 1/8" thick Delrin body capable of withstanding those obstacles he is so eager to walk right over. Whegly...

                                                                                                                                                    Squid Cable
                                                                                                                                                    Price: $4.95

                                                                                                                                                      Sometimes you need to hook a servo or a sensor directly to your Arduino, or minimize the mess of jumper wires on your breadboard. These Squid Sensor Cables - 10 pack will help you do just that! On one end, you have a standard 3-pin connector (.1"/2.54mm pitch), and on the other end you have 3 single female jumper wires. You can easily position each cable exactly where you need it. and are 200mm in length. Add some 3-Pin Couplers to attach these cables directly to a servo or your arduino. These...

                                                                                                                                                      3-Pin Couplers
                                                                                                                                                      Price: $2.95

                                                                                                                                                        You can use these 3 pin couplers to connect 3 pin jumper wires together and create your own extension wires. This is perfect for extending analog sensors or servos! You can also use them to make modular connectors on your breadboard/protoboard so that connecting to other components is even easier. The pins on these couplers are spaced at .1"/2.54mm, so they're compatible with Electronic Brick/Phidgets sensor cables, hobby servo cables, and most breadboards/protoboard. They are NOT compatible...

                                                                                                                                                        9mm Push Button with Jumper Wires 9mm push buttom with jumpers, 9mm push buttom, red push button, push button with jumpers, button with jumper cables,
                                                                                                                                                        Price: $1.95

                                                                                                                                                          The 9mm Push Button with Jumper Wires is great for any enclosure projects that need a panel mount push button. The button is an SPST button with two 30cm female jumper wires- plug them straight into your project, or snip them off!Each button includes a mounting plate and all necessary hardware to mount to any RobotGeek product that has a centimeter grid pattern.

                                                                                                                                                          Mini Turbo Fan Mini Turbo Fan
                                                                                                                                                          Price: $13.95

                                                                                                                                                            The Mini Turbo Fan is a Mini Badass. Sporting 73g of thrust while weighing in at only 30g it can take off if you give it full throttle. Perfect for fire fighting robots or cooling you on hot summer days. The Mini Turbo Fan comes with a heat sink and 4" cable with male ends. To extend the cable we recommend using our 2-pin F/F jumper cable. *The fan edges may rub against the duct walls when you first run it. This is okay. The blades will actually trim themselves down. That is how badass this...

                                                                                                                                                            12V 2A DC Power Supply
                                                                                                                                                            Price: $10.95

                                                                                                                                                              Power Supply for general project use. North American Style Plug 12VDC, 2 Amp, Center Positive Polarity, 5.5x2.1MM PS - You might want one of these too.

                                                                                                                                                              RFID EM4200 40mm Clear Plastic Disk (Sticker Backing)
                                                                                                                                                              Price: $0.79

                                                                                                                                                                RFID EM4200 40mm Clear Plastic Disk (Sticker Backing) Frequency 125 kHz Protocol EM4102 Read / Write Read only EEPROM Capacity 64 Bits Dimensions 40mm diameter / approx 1mm thickness Read Range 114.3mm ...

                                                                                                                                                                RobotGeek Arduino Linear Actuator Experimenters Kit RobotGeek, Geekduino, Linear, Actuator, Kit, arduino, starter, robot, geek, Experimenters, Kit
                                                                                                                                                                Price: $199.95

                                                                                                                                                                  The RobotGeek Geekduino Linear Actuator Kit is a great introductory arduino workstation that will teach you about linear actuators. Choose one of four linear actuators to work with, then begin learning the ins and outs of their control and usage. At the core of the RobotGeek Arduino kits is the workbench to mount your projects on. All RobotGeek products are compatible with the bench and each include mounting hardware giving you the opportunity to continue adding to your portable arduino...

                                                                                                                                                                  RobotGeek Pan and Tilt Kit
                                                                                                                                                                  Price: $49.95

                                                                                                                                                                    The Robot Geek Pan & Tilt Kit is a basic Pan & Tilt with two Robot Geek Robot Servos and brackets needed for a small Pan & Tilt setup. (If you want a complete kit with a Geekduino, control sensors, laser and more check out the Robot Geek Desktop Roboturret.) The Pan & Tilt comes with mounting plates for a standalone configuration and stand offs for mounting directly onto projects. The mounting plates conform to the standard Robot Geek 1 X 1 CM hole pattern used on all Robot...

                                                                                                                                                                    Treasure Project Box project box, arduino project box, rfid project box, rfiduino project box, treasure chest box, treasure box, treasure project box
                                                                                                                                                                    Price: $9.95

                                                                                                                                                                      Sometimes a regular project box just isn’t enough. You need some flash, some mystery, some style. We understand, we felt the same way. We had these wooden treasure boxes special made for a few of our own projects and now you can DIY in style too. Why make your project in a plain box when you can make it look like a mysterious magic box bought in a dangerous back alley in some remote corner of the world? Time to step up your DIY game. We recommend using our Panel Mount Dual Power Cable with the...

                                                                                                                                                                      4 Pin Sensor Cable 300mm 4 pin sensor cable, 4pin sensor cable, lcd sensor cable, lcd cable, 4pin cable, 4 pin cable, sensor cable
                                                                                                                                                                      Price: $1.95

                                                                                                                                                                        This standard 4 Pin Sensor Cable is 30cm long and has a .1"/2.54mm pitch, making it compatible with 4-pin sensors and shields. You can also add Pin Couplers and attach the cable to breadboards.

                                                                                                                                                                        Power Supply 12V - 5A (2.1mm Jack) Power Supply 12VDC 5.0A - US
                                                                                                                                                                        Price: $19.95

                                                                                                                                                                          Power Supply for general project use. North American Style Plug 12VDC, 5 Amp, Center Positive Polarity, 5.5x2.1MM PS - You might want one of these too.

                                                                                                                                                                          RFID EM4200 40mm White Round Sticker
                                                                                                                                                                          Price: $0.79

                                                                                                                                                                            RFID EM4200 40mm White Round Sticker Frequency 125 kHz Protocol EM4102 Read / Write Read only EEPROM Capacity 64 Bits Dimensions 40mm diameter / approx 0.5mm thickness Read Range 101.6mm ...

                                                                                                                                                                            RobotGeek Arduino RFID Lock Box Kit RobotGeek, RFID, Lockbox, Kit, Robot, Geek, Lock, solenoid, RFIDuino, Geekduino, Trossen, Robotics, Project, Box
                                                                                                                                                                            Price: $44.95

                                                                                                                                                                              The RobotGeek RFID Lock Box kit combines Arduino, RFID and a Project Box to make your very own personal safe! The lock box kit allows you to to program your arduino to lock and unlock the box with the swipe an RFID tag or card, it even stays locked if unplugged. Mildly secure your semi-valuables in this decorative conversation piece!   We don't advise keeping real valuables in the treasure box! Kit Includes: 1x Wooden Project Box 1x RobotGeek Geekduino 1x RobotGeek RFIDuino 1x...

                                                                                                                                                                              RobotGeek Desktop Roboturret
                                                                                                                                                                              Price: $99.95

                                                                                                                                                                                The RobotGeek Desktop RoboTurret is the latest in our line of RoboTurrets. The Desktop RoboTurret is an Arduino based robotic platform that makes it easy to get started in the world of robotics! Whether you're completely new to Arduino or you've got a few Arduino project under your belt, the Desktop RoboTurret is an amazing platform to build robotic projects on. The Desktop RoboTurret's documentation will introduce you to robot servos, sensors, and basic robot behavior. Want to build a vision...

                                                                                                                                                                                RobotGeek Pushbutton arduino pushbutton, arduino button, arduino button board, arduino digital button
                                                                                                                                                                                Price: $2.95

                                                                                                                                                                                  The RobotGeek Pushbutton is a self-contained Arduino Button board that makes it easy to add a pushbutton to your Arduino Project. This RobotGeek Pushbutton has a built in pull-down resistor, so the signal can be read as a digital input from your Arduino or other microcontroller. This Arduino Button Board has the standard RobotGeek three pin connection so it plugs right into the RobotGeek Sensor Shield to get you up and running immediatly. As with all RobotGeek sensors, the hole mounting...

                                                                                                                                                                                  RobotGeek 12v Mini Self-Priming Pump
                                                                                                                                                                                  Price: $17.95

                                                                                                                                                                                    If you are looking for an Arduino Pump the RobotGeek small liquid and air pump is a great solution. This pump is self priming so it can be used for projects involving plant watering, suction, drainage, drink dispensing, barbots, and more. To use this for an Arduino Pump project all you need is a RobotGeek Relay and seperate power supply. The pump can operate at either 6 or 12 volts and packs a punch in a small package! Recommended Arduino Pump Tutorials: Arduino ShotBot Project Arduino Pump...

                                                                                                                                                                                    RobotGeek Servo Side Bracket robotgeek servo side bracket, servo side bracket, side bracket, rg side bracket, side bracket
                                                                                                                                                                                    Price: $4.95

                                                                                                                                                                                      The RobotGeek Servo Side Bracket is the perfect way to mount your RobotGeek Servo to other servos and your Robot. The side bracket can attach to 5 different positions on the servo rail to make it easy to configure your robot the way you want it. The circular hole pattern on the bottom of the bracket will also attach directly to a RobotGeek Servo Horn or other brackets, allowing you to easily build up complex servo systems. RobotGeek Servo Side Bracket by RobotGeek on Sketchfab ...

                                                                                                                                                                                      RFID Key Fob
                                                                                                                                                                                      Price: $0.79

                                                                                                                                                                                        Blue RFID Key Fob Frequency 125 kHz Protocol EM4102 Read / Write Read only EEPROM Capacity 64 Bits Dimensions 1.5" x 1.25" Read Range 76.2mm ...

                                                                                                                                                                                        12v DC Motor Pump - Full View
                                                                                                                                                                                        Price: $24.95

                                                                                                                                                                                          If you are looking for a food safe Arduino Pump the RobotGeek Large Liquid Pump is a great solution. This pump is self priming, quiet, and can move up to 2 liters per minute. To use this for an Arduino Pump project all you need is a RobotGeek Relay and seperate power supply. The pump will work with standard aquarium tubing. The fit is a little tight, but the tubing will go on. We recommend picking up some of our food safe 3.5mm silicone tubing which fits great and goes on easier! ...

                                                                                                                                                                                          RobotGeek 4 Pin Sensor Squid 300m 4 pin, sensor, cable, squid, data, 300m, jumper, breakout
                                                                                                                                                                                          Price: $4.95

                                                                                                                                                                                            Sometimes you need to hook a serial/I2C device directly to your Arduino, or minimize the mess of jumper wires on your breadboard. These 4 Pin Sensor Squid 300m cables will help you do just that! On one end, you have a standard 4-pin connector (.1"/2.54mm pitch), and on the other end you have 4 single female jumper wires. You can easily position each cable exactly where you need it. Each cable is 300m in length. Comes in pack of 10 squid cables. Pair these cables with 2-pin couplers to adapt...

                                                                                                                                                                                            RobotGeek Desktop Roboturret
                                                                                                                                                                                            Price: $119.95-$134.95

                                                                                                                                                                                              The RobotGeek Desktop RoboTurret w/ Vision Tracking is the latest in our line of RoboTurrets. The Desktop RoboTurret is an Arduino based robotic platform that makes it easy to get started in the world of robotics! Whether you're completely new to Arduino or you've got a few Arduino project under your belt, the Desktop RoboTurret is an amazing platform to build robotic projects on. The Desktop RoboTurret's documentation will introduce you to robot servos, sensors, and basic robot behavior. The...

                                                                                                                                                                                              RobotGeek Pumping Station arduino pump, arduino liquid pump, arduino water pump, arduino pump tutorial
                                                                                                                                                                                              Price: $29.95

                                                                                                                                                                                                If you are looking for an Arduino Pump solution the RobotGeek Pumping Station is a perfect all-in-one pumping kit. Inside the box is a small powerful liquid pump, RobotGeek Relay, manual run button, and power supply jack. The pump is self priming so it can be used for projects involving plant watering, suction, drainage, drink dispensing, barbots, and more. The Pumping Station makes it a breeze to build Arduino pump projects. Just plug in a sensor cable and power supply to add a pumping...

                                                                                                                                                                                                RobotGeek Rotation Knob arduino rotation knob, arduino rotation sensor, arduino knob sensor, arduino knob control, arduino rotation control
                                                                                                                                                                                                Price: $4.95

                                                                                                                                                                                                  Do you need Rotation Knobs for your Arduino project? The RobotGeek Knob is good choice! It has the standard RobotGeek three pin connection so it plugs right into the RobotGeek Sensor Shield to get you up and running immediatly. As with all RobotGeek sensors, the hole mounting pattern is on a 1x1 CM grid so they easily mount to the RobotGeek Workbenches or any other RobotGeek kit. Each sensor includes a mounting plate and all hardware needed to mount to any workbench or RobotGeek product that...

                                                                                                                                                                                                  RobotGeek Servo C Bracket robotgeek servo c bracket, c bracket, robotgeek bracket, robotgeek servo bracket, servo bracket, servo c bracket
                                                                                                                                                                                                  Price: $4.95

                                                                                                                                                                                                    The RobotGeek Servo C Bracket is a great tool for creating joints with your RobotGeek Servo. This bracket easily attaches to the servo's horns with just a few bolts. A variety of mounting holes on the bracket make it easy to mount the bracket to your robot or sensors in a variety of ways. The circular hole pattern on the bottom of the bracket will also attach directly to a RobotGeek Servo Horn or other brackets, allowing you to easily build up complex servo systems. RobotGeek Servo Hinge...

                                                                                                                                                                                                    Variable Power Supply 15-24V 4.5A (2.1mm Jack) Variable Power Supply 15-24VDC 4.5A - US
                                                                                                                                                                                                    Price: $24.95

                                                                                                                                                                                                      Variable Power Supply for general project use. North American Style Plug 15-24VDC 4.5A - US Center Positive Polarity, 5.5x2.1MM PS - You might want one of these too.

                                                                                                                                                                                                      2-Pin Couplers
                                                                                                                                                                                                      Price: $2.95

                                                                                                                                                                                                        You can use these 2 pin couplers to connect 2/4 pin jumper wires together and create your own extension wires. You can also use them to make modular connectors on your breadboard/protoboard so that connecting to other components is even easier. The pins on these couplers are spaced at .1"/2.54mm, so they're compatible with Electronic Brick/Phidgets sensor cables and most breadboards/protoboard. They are NOT compatible with Grove cables. ...

                                                                                                                                                                                                        4x AA Battery to 2.1/5.5mm DC Barrel Jack AA, Battery, 2.1, 5.5, DC, Barrel, Jack, pack, holder, 4x
                                                                                                                                                                                                        Price: $2.95

                                                                                                                                                                                                          This 4x AA Battery to 2.1/5.5mm DC Barrel Jack is perfect for small mobile Arduino Projects. Just add 4 AA batteries and plug the barrel jack into your Arduino Board, and you're ready to rock! Supplies just over 6 volts of power with a fresh set of batteries, which works well with a wide variety of projects. Great for infrared, LED, or any small Arduino project you'd like to take on the go!