Item #: ASM-RG-PUSHBUTTON -
The RobotGeek Pushbutton is a self-contained Arduino Button board that makes it easy to add a pushbutton to your Arduino Project. This RobotGeek Pushbutton has a built in pull-down resistor, so the signal can be read as a digital input from your Arduino or other microcontroller. This Arduino Button Board has the standard RobotGeek three pin connection so it plugs right into the RobotGeek Sensor Shield to get you up and running immediatly. As with all RobotGeek sensors, the hole mounting...
Item #: ASM-RG-ROTKNOB -
Do you need Rotation Knobs for your Arduino project? The RobotGeek Knob is good choice! It has the standard RobotGeek three pin connection so it plugs right into the RobotGeek Sensor Shield to get you up and running immediatly. As with all RobotGeek sensors, the hole mounting pattern is on a 1x1 CM grid so they easily mount to the RobotGeek Workbenches or any other RobotGeek kit. Each sensor includes a mounting plate and all hardware needed to mount to any workbench or RobotGeek product that...
Item #: ASM-NEOKNOB -
Want to make a dial that clearly displays the setting of a knob, like in fancy car stereos and sequencers? The RobotGeek Rotation Knob with Neopixel Ring Display is here for you! With a bright and clear 12 RGB LED NeoPixel ring nicely mounted with a RobotGeek Rotation Knob in the center, there are a ton of ways to enhance your next project! The mount is matched with the centimeter grid pattern, compatible with All RobotGeek Workbenches. ...
Item #: ASM-RG-JOYSTICKV2 -
If you are looking for a good Arduino Joystick the RobotGeek Joystick is the best choice. We had these joysticks special made two joystick options; the standard mushroom top used in gaming controllers and a tall stick for much greater range of motion. The joystick has the standard RobotGeek three pin connection and plugs right into the RobotGeek Sensor Shield so you can be up and running immediatly. This arduino joystick is self centering and will return to the home position when let go. The...
Item #: ASM-RG-SLIDER -
The RobotGeek Slider is a great arduino slide potentiometer for projects requiring a linear analog input. The slider has the standard RobotGeek three pin connection and plugs right into the RobotGeek Sensor Shield so you can be up and running immediatly. This arduino slide control is a linear potentiometer, which means you can read it just as you would any other potentiometer/analog sensor. The large handle cap and the smooth action on this slider make it great for all kinds of control panels...
Item #: RG-CNTRL-PNL -
The RobotGeek Control Panel is a great way to control your arduino projects that require simple joystick / rotation control. The panel is an excellent addition to other RobotGeek kits such as the Desktop RobotTurret or Pan and Tilt kit. Kit includes:3x RobotGeek Joysticks1x RobotGeek Rotation Knob5x RobotGeek 3 Pin cablesHardware, plates and tools required for assembly ...