Touch / Pressure / Flex

Show
Switch - Floor Mat - Single Strip
AC-700-30-926C
Price: $4.45 In Stock
Item #: AC-700-30-926C -

    The Floor Mat Switch works by spacing two strips of metal apart with thin squares of foam in-between them every .75 inches. The pairs of metal strips are spaced out 2.5 inches from each other for the length of the mat. When someone steps on the mat their weight presses the two metal strips together creating a closed contact. All the strips are connected down both sides of the mat creating one large switch. The individual strips can be cut apart to create individual switches and the mat itself...

    Softpot Rotary Potentiometer
    S-20-SEN-08678
    Price: $14.95 In Stock
    Item #: S-20-SEN-08678 -

      These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. Unit comes with adhesive...

      Switch - Floor Mat - 14 Inches x 30 Inches
      KIT-AC-700-30-926B
      Price: $19.95 In Stock
      Item #: KIT-AC-700-30-926B -

        The Floor Mat Switch works by spacing two strips of metal apart with thin squares of foam in-between them every .75 inches. The pairs of metal strips are spaced out 2.5 inches from each other for the length of the mat. When someone steps on the mat their weight presses the two metal strips together creating a closed contact. All the strips are connected down both sides of the mat creating one large switch. The individual strips can be cut apart to create individual switches and the mat itself...

        SoftPot Linear Potentiometer - 50mm
        S-20-SEN-08680
        Price: $12.95 In Stock
        Item #: S-20-SEN-08680 -

          These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. Unit comes with adhesive...

          Switch - Floor Mat - 5 feet x 30 Inches
          KIT-AC-700-30-926A
          Price: $74.95 In Stock
          Item #: KIT-AC-700-30-926A -

            The Floor Mat Switch works by spacing two strips of metal apart with thin squares of foam in-between them every .75 inches. The pairs of metal strips are spaced out 2.5 inches from each other for the length of the mat. When someone steps on the mat their weight presses the two metal strips together creating a closed contact. All the strips are connected down both sides of the mat creating one large switch. The individual strips can be cut apart to create individual switches and the mat itself...

            SoftPot Linear Potentiometer - 100mm
            S-20-SEN08607
            Price: $14.95 In Stock
            Item #: S-20-SEN08607 -

              These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. --> Unit comes with...

              SoftPot Linear Potentiometer - 200mm
              S-20-SEN-08679
              Price: $17.95 In Stock
              Item #: S-20-SEN-08679 -

                These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. --> Unit comes with...

                RobotGeek Voltage Divider RobotGeek Voltage Divider, Robot Geek Voltage Divider, Voltage Divider, FSR Voltage Divider, Force Sensitive Resistor Voltage Divider, FSR Interface, FSR Analog Interface
                ASM-RG-VOLTDIV
                Price: $4.95 In Stock
                Item #: ASM-RG-VOLTDIV -

                  The RobotGeek Voltage Divider is a simple yet effective way to turn a variable resistor, such as an FSRs, Softpots, or Pressure Sensors into a tunable 0-5v analog signal. The design is super simple and completely open source, but saves tinkerers from having to breadboard a potentiometer of their own. A 2 position terminal block and 0.1" spaced header are available for sensor input, a 3 pos right angle header breaks out Analog output, 5v input, and Gnd. Each sensor includes necessary...

                  FSR Kit Combo
                  KIT-S-20-1000-FSRKT
                  Price: $32.25 In Stock
                  Item #: KIT-S-20-1000-FSRKT -

                    This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

                    .2 Inch FSR Kit force sensor
                    KIT-S-20-1000-FSRKT2
                    Price: $14.35 In Stock
                    Item #: KIT-S-20-1000-FSRKT2 -

                      This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

                      .5 Inch FSR Kit force sensor
                      KIT-S-20-1000-FSRKT5
                      Price: $14.95 In Stock
                      Item #: KIT-S-20-1000-FSRKT5 -

                        This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

                        1.5 Inch FSR Kit force sensor
                        KIT-S-20-1000-FSRKT15
                        Price: $16.25 In Stock
                        Item #: KIT-S-20-1000-FSRKT15 -

                          This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...

                          24 Inch Strip FSR Kit force sensor
                          KIT-S-20-1000-FSRKT24
                          Price: $26.00 In Stock
                          Item #: KIT-S-20-1000-FSRKT24 -

                            This kit comes with everything you need to hook your Force Sensing Resistor into your microcontroller or Phidgets Interface Kit. Connect the FSR to the voltage divider board using the 2-Pin female cable, or with the terminal adaptor. Then feed the voltage divider power and ground through the 3-pin cable, and you'll get an analog voltage reading on the third pin of that cable. Check out this video and the videos below for more info. The FSR in this kit is perfect for robotic grippers, robot...