Switches / Digital I/O

Show
Switch - Floor Mat - Single Strip
AC-700-30-926C
Price: $4.45 In Stock
Item #: AC-700-30-926C -

    The Floor Mat Switch works by spacing two strips of metal apart with thin squares of foam in-between them every .75 inches. The pairs of metal strips are spaced out 2.5 inches from each other for the length of the mat. When someone steps on the mat their weight presses the two metal strips together creating a closed contact. All the strips are connected down both sides of the mat creating one large switch. The individual strips can be cut apart to create individual switches and the mat itself...

    Switch - Floor Mat - 14 Inches x 30 Inches
    KIT-AC-700-30-926B
    Price: $19.95 In Stock
    Item #: KIT-AC-700-30-926B -

      The Floor Mat Switch works by spacing two strips of metal apart with thin squares of foam in-between them every .75 inches. The pairs of metal strips are spaced out 2.5 inches from each other for the length of the mat. When someone steps on the mat their weight presses the two metal strips together creating a closed contact. All the strips are connected down both sides of the mat creating one large switch. The individual strips can be cut apart to create individual switches and the mat itself...

      Switch - Floor Mat - 5 feet x 30 Inches
      KIT-AC-700-30-926A
      Price: $74.95 In Stock
      Item #: KIT-AC-700-30-926A -

        The Floor Mat Switch works by spacing two strips of metal apart with thin squares of foam in-between them every .75 inches. The pairs of metal strips are spaced out 2.5 inches from each other for the length of the mat. When someone steps on the mat their weight presses the two metal strips together creating a closed contact. All the strips are connected down both sides of the mat creating one large switch. The individual strips can be cut apart to create individual switches and the mat itself...

        Foot Switch Foot, Switch, pedal, physical, input, computing, arduino, freeduino, seeeduino
        SS-SWT129C6B
        Price: $5.50 Back Order
        Item #: SS-SWT129C6B -

          Building an electronic music project? Need to step on the gas? Perhaps this is the final component for your sub-orbital space fighter? Whatever your application is, this Foot Switch is perfect for all applications in need of a Foot Switch!

          9mm Push Button with Jumper Wires 9mm push buttom with jumpers, 9mm push buttom, red push button, push button with jumpers, button with jumper cables,
          ASM-RG-JBUTTON
          Price: $1.95 In Stock
          Item #: ASM-RG-JBUTTON -

            The 9mm Push Button with Jumper Wires is great for any enclosure projects that need a panel mount push button. The button is an SPST button with two 30cm female jumper wires- plug them straight into your project, or snip them off!Each button includes a mounting plate and all necessary hardware to mount to any RobotGeek product that has a centimeter grid pattern.

            RobotGeek Pushbutton arduino pushbutton, arduino button, arduino button board, arduino digital button
            ASM-RG-PUSHBUTTON
            Price: $2.95 In Stock
            Item #: ASM-RG-PUSHBUTTON -

              The RobotGeek Pushbutton is a self-contained Arduino Button board that makes it easy to add a pushbutton to your Arduino Project. This RobotGeek Pushbutton has a built in pull-down resistor, so the signal can be read as a digital input from your Arduino or other microcontroller. This Arduino Button Board has the standard RobotGeek three pin connection so it plugs right into the RobotGeek Sensor Shield to get you up and running immediatly. As with all RobotGeek sensors, the hole mounting...

              Magnetic Door Switch Magnetic Door Switch, Magnetic Switch, Digital switch, Arduino switch, Seeeduino switch, Freeduino switch
              SS-SEN114A2B
              Price: $4.95 In Stock
              Item #: SS-SEN114A2B -

                Easily attach to doors with screw holes. Referred article: Window Magnet Contact - (use with Arduino)

                RobotGeek Tilt Sensor arduino tilt sensor, tilt sensor, arduino digital tilt senor, arduino tilt senor board
                ASM-RG-TILTSEN
                Price: $4.95 In Stock
                Item #: ASM-RG-TILTSEN -

                  The RobotGeek Tilt Sensor is a fast and flexible way to add an Arduino tilt senor Project. By reading this sensor as a digital input, you can determine if an object the sensor is mounted on tilted or not. This sensor is unique because of the orientation of its ports. Instead of having the tilt switch soldered into the board, there are two 2-pin female ports. This allows you to orient your tilt vertically or horizontally to suit your project best. If you need your tilt switch to be further away...

                  Robot Geek Relay
                  ASM-RG-RELAY
                  Price: $4.95 In Stock
                  Item #: ASM-RG-RELAY -

                    Time to step up the voltage with this Arduino Relay Board. The Arduino platform is a great way to control lights, buzzers, displays and more - but what if you have a device that doesn't run on the Arduino's native 5 volts? One simple way to do it is to use the RobotGeek Relay. This little relay board will use a signal from a 5v microcontroller to make a mechanical connection. This connection is physically seprated from the arduino, meaning you can connect devices that have different voltages...

                    PowerSwitch Tail II PowerSwitch Tail, 120V relay, wall plug relay, power, switch, tail,2, ii, ac
                    SF-COM-10747
                    Price: $28.95 In Stock
                    Item #: SF-COM-10747 -

                      Want to control a standard wall outlet device with your micro controller, but don't want to mess with the high voltage wiring? This might just be the right device for you! The PowerSwitch Tail is designed to allow you to safely control an outlet device without exposing any 120VAC voltages. You can plug in any standard 120VAC 3-prong outlet to be controlled by most any microcontroller. This will work great with Arduino! The PowerSwitch Tail II improves on the original PowerSwitch Tail by...