Item #: RG-LCDPANEL -
Need a control panel for your next project? The RobotGeek 4 Line LCD Control Panel is a great choice! With a 4 line LCD Display, you'll have enough room to display menu lists, lots of sensor readouts, pictures, and more! On each side of the display are 4 buttons. The left buttons are marked for moving up and down, and the right two buttons make great select and back buttons. Like the rest of the RobotGeek line, this control panel is compatible with the 1cm x 1cm grid found on RobotGeek...
Item #: RG-LARGELCD -
The RobotGeek 4 Line LCD w/ Mount is a perfect screen for your next project! With twice the space of the original RobotGeek LCD, you can easily display scrolling lists, paragraphs of text, or even make a tile-based game! The display can be easily mounted to projects and Workbenches. The bottom has the standard RobotGeek 1cm X 1cm grid making all RobotGeek products compatible with each other.
Item #: ASM-RG-LCD -
The RobotGeek LCD is a fast and easy way to add text output to your projects. The enclosure can float freely on your desk or be mounted to projects and Workbenches. The bottom has the standard RobotGeek 1cm X 1cm grid making all RobotGeek products compatible with each other.
Item #: ASM-NEOKNOB -
Want to make a dial that clearly displays the setting of a knob, like in fancy car stereos and sequencers? The RobotGeek Rotation Knob with Neopixel Ring Display is here for you! With a bright and clear 12 RGB LED NeoPixel ring nicely mounted with a RobotGeek Rotation Knob in the center, there are a ton of ways to enhance your next project! The mount is matched with the centimeter grid pattern, compatible with All RobotGeek Workbenches. ...
Item #: ASM-RG-RCA -
Wish you could display visual elements of your project on a standard television? Unleash your vision on the screen with the RobotGeek RCA Board! This board will allow you to hook your Arduino up to any screen with a standard RCA Jack! With another board, you can output video and sound. This is a slick way to show off sensor readings, and can even be used to make rudimentary game consoles! As with all RobotGeek sensors, the hole mounting pattern is on a 1x1 CM grid so they easily mount to the...
Item #: ASM-RG-BUZZER -
Get buzzing with this Arduino Buzzer! The RobotGeek Buzzer is an easy way to add audio output to your Arduino. By simply sending a 5v signal to the RobotGeek Buzzer, the device will emit a tone. You can also use the Arduino Tone Function to send different tones to the buzzer. NOTE:some frequencies will work better than others with this piezo buzzer. This Arduino Buzzer has the standard RobotGeek three pin connection so it plugs right into the RobotGeek Sensor Shield to get you up and running...
Item #: ASM-RG-LASER -
The RobotGeek Laser is an easy way to add a red laser to your robot! Just plug the black wire into ground and the white wire into a 5v signal, and the laser will power on. The .1"/2.54mm female headers make it easy to plug into breadboards, jumper wires, standard header pins and more. With this laser you'll get three different mounting solutions! These solutions mean that you can spend less time figuring out how to mount the laser and more time firing lasers! You can even use couplers to...